

Search messages and discussions
Search preserved mailing-list messages and current email and website contributions. Current posts are searchable before weekly archival. Recovery gaps remain possible. Words are matched together; try fewer terms if needed.
Page 27+: 60 results shown for Revs.
Source-balanced relevance: matches from both collections are interleaved, with source dates breaking ties. Restoration time is not the original posting date.
- Re: Transmission Ratios, Diesels, ConversionsHistorical mailing list - Robert S KeezerMon, 29 Oct 2001 00:54:33 -0800...If i had a five-speed , I could turn a few hundred less revs in tall third(fourth). Third would really pull up in...
- Re: tach in an 85Historical mailing list - Daniel RotblattTue, 7 Jun 2011 17:26:18 -0700...Your method for climbing hills seems more in line with what I would imagine - get the revs up so you are higher on the...
- Re: Consumer Reports on oil/LHistorical mailing list - Maher, Steve (SD-MS)Thu, 20 Jun 1996 09:00:00 -0700 (PDT)...They turn more revs per mile, and wear out more quickly. One product of this, is more metal particulates in the oil for every...
- Re: ClimbingHistorical mailing list - Scott Daniel - TurbovansSun, 30 Jan 2011 11:20:35 -0800...the main point is ....decent low and mid-range but there's more power to be found at higher revs . that's 'normal' and...
- Re: Diesel - too much oil sagaHistorical mailing list - Scott Daniel - TurbovansSun, 8 Aug 2010 14:28:29 -0700...Max revs, > first a blue cloud and then a black one, and then she finally stopped. > > Now she's very hard to start, appears...
- Re: Electronic points -waste of time/money?Historical mailing list - Todd LastMon, 15 Jan 2007 20:21:28 +0000...and now it's doing something weird - it idles > >>>> fine, and > >>>> revs > >>>> fine, but won't idle after revving, just stalls. > >>> > >>> They work fine...
- 77 fuel injection - glorious end to Chapter 1Historical mailing list - Dave BackeWed, 24 Apr 1996 19:47:34 -0600...I step on the gas, and it revs up like it should. A quick check for gas leakage, and I start packing my tools...
- Re: Weird idle problem continuesHistorical mailing list - Stuart MacMillanSat, 18 Oct 2014 13:51:09 -0700...All hooked up and the same situation--hard start, won't idle, 30 seconds later revs up to 3500 rpm and stays there. I...
- Re: Engine and Transmission Swap BS: was Thinking Swap ...(Now Full)Historical mailing list - T BerkWed, 6 Sep 2000 17:22:06 -0700...I like to rev my engines from time to time, hardly do so on every occasion but don't fear sustained revs under load...
- Re: Front heater won't give heat, workin on it.Historical mailing list - thewestymanThu, 23 Aug 2018 21:02:49 -0700...tank, put the cap back on the tank and cut > the revs back to idle. A couple of cool-down/heat up cycles on...
- Re: Syncro tire dia. spec. - tolerances? Ask Mr. Science!Historical mailing list - Fitz-Randolph, DouglasFri, 16 Apr 1999 16:53:00 -0400...if I had to take into account tire load and its influence on revs per mile *so would someone with brand new tires* - so...
- Re: 1.9L Gutless when first startedHistorical mailing list - Michael ElliottMon, 22 Oct 2007 06:31:27 -0700...There might be a soft cough or two (backfires?). > > After 30 seconds or so, the engine "wakes up" and revs properly. > > If I don...
- Re: rod knock on ivory '84 westyHistorical mailing list - Jim FelderThu, 15 Dec 2011 10:21:26 -0600...Tooling around town and watching the revs, you might get away with such a knock for a long time but you would DEFINITELY see...
- Re: Clutch Adjustment ?Historical mailing list - J StewartThu, 15 Sep 2011 15:32:40 +0000...clutch > chatter ) > Clutch slips when accelerating or going up hills ( engine revs increase, but > van does not gain speed ) > > those are the common ones...
- Lima Bean rolls under its own power (78) longHistorical mailing listSat, 16 Mar 1996 18:45:21 PST...has been started so I run it up and down the revs a bit until it is getting warm and shut it down. I...
- Re: Oil Change Screwup - HELP!Historical mailing list - David JohnsonWed, 19 Jul 2006 18:06:35 -0600...the stutter really only happened when the engine was at higher revs, I am hopefully this will solve the problem. On that note, anyone...
- Clutch Dead in Orillia Ontario / Algonquin Park - Does anyone know Valle Shell?Historical mailing list - 1980 VW Westfalia \"Pokey\"Tue, 5 Sep 2000 10:48:12 -0400...It didn't feel like slipping like clutch problems I've had in other vehicles where the revs climb and the vehicle doesn't...
- Re: Cool Air-Cooled (long)Historical mailing list - G. Matthew BulleyThu, 7 Feb 2002 08:22:30 -0500...downshift to a lower gear, run the motor at much higher revs, and allow the cooling system to do its work. All that being...
- Re: Hello - Idiot oil light keeps coming on!Historical mailing list - Scott Daniel - TurbovansSun, 7 Nov 2010 16:42:09 -0800...and the idiot light was flickering off just about 3/k revs. >> > >> >> >> Had this happen recently as well on my 1.9 WBX. Turned...
- Re: regearing a manual transHistorical mailing list - Jeff SchwaiaSat, 5 Sep 2015 15:34:04 -0700...of my powerband...rather than waiting > and lugging along till the revs really get low, or downshifting and > redlining the motor....The spread between...
- Re: Diesel vs Gas VanagonsHistorical mailing list - Scott Daniel - ShazamFri, 11 Jan 2008 20:36:36 -0800...they'll go forever, and they don't mind very high revs at all. But it's all fun ! Smiles, scott -----Original Message----- From...
- Re: Front heater won't give heat, workin on it.Historical mailing list - Jim. FelderFri, 24 Aug 2018 07:44:46 -0500...tank, put the cap back on the tank and cut > > the revs back to idle. A couple of cool-down/heat up cycles on...
- Re: Darn idle, stalling, running rich...Historical mailing list - Marc PerdueThu, 11 Oct 2012 10:34:30 -0400...Problem is, most of the streets > nearest work have a 25 mph or lower speed limit, so the revs don't get that > high...
- Re: 094 5 Speed Kit Diesel ConversionsHistorical mailing list - JasonTue, 3 Jan 2017 17:39:00 -0500...TDI's don't like the high revs as much as IDI's when it comes to fuel mileage I've found. The Whitestar...
- Re: Syncro tire dia. spec. - tolerances? Ask Mr. Science!Historical mailing list - EMZFri, 16 Apr 1999 18:58:26 -0400...if I had to take into account tire load and its influence on revs per > mile *so would someone with brand new tires* - so...
- Re: Propane Conversion for Vanagon--head north!Historical mailing list - Mark DormFri, 14 Feb 2003 10:08:33 -0800...There is one >main > >>over-all adjuster and one each for idle and running (this is > >>adjusted at 2500 revs). > >> > >>Since the engine is...
- Re: Break-in.......new engine (your opinion?)Historical mailing list - Stan WilderWed, 16 Jun 2004 14:21:23 -0500...Repeted this 4 - 5 times. > Took a 20 minuit ride at 2-3000 rpm, letting the revs go up and down a bit . > Then...
- Re: Propane Conversion for Vanagon--head north!Historical mailing list - Dana MorphewSat, 15 Feb 2003 18:12:58 -0800...There is one >>> > main > >>>over-all adjuster and one each for idle and running (this is >>>adjusted at 2500 revs). >>> >>>Since the engine is...
- AT Fluid Burping out of ATF Dip Stick Tube? Causes Trans
Malfunction, 88 AutoHistorical mailing list - robertmstewartThu, 20 Jul 2006 21:52:49 -0400...At the stop light with the brake on I can see the rpm�s go from about 875 and revs to about 1,000...
- All About 16" Wheels - CV-900s Have ArrivedHistorical mailing list - Derek DrewFri, 15 Mar 2002 18:44:14 -0500...You can go outside these revs per mile ranges by another 10 to 20 revs per mile without ill effects that are too pronounced...
- Re: AT Fluid Burping out of ATF Dip Stick Tube? Causes Trans
Malfunction, 88 AutoHistorical mailing list - Mike CollumThu, 20 Jul 2006 22:31:58 -0400...I can see the rpm�s go from about 875 > and revs to about 1,000, then levels off again, normally at idle it...
- Re: 02 sensorsHistorical mailing list - Mark IngallsSat, 4 Aug 2001 16:02:57 -0500...After doing this a >few >times (about 5-10 good revs in both 2nd and 3rd gear), the acceleration >became clean and fine. I...
- Syncro tire dia. ad nauseam(F)Historical mailing list - Mark DrillockFri, 16 Apr 1999 16:53:52 -0700...if I had to take into account tire load and its influence on > revs per mile *so would someone with brand new tires* - so...
- engine conversion experiences (long)Historical mailing list - Bj�rnWed, 24 Feb 1999 10:49:05 -0800...It is a bit smoother than the TDI in terms of noise and vibrations and revs a bit higher too. My brother�s wife...
- Re: The "Other" Vanagon Syndrome, Part IIHistorical mailing list - James VMon, 29 Sep 2003 11:34:34 -0700...off the gas completely and/or de-clutch to drop the revs for a couple of seconds. I didn't experience the problem at...
- Re: An Engine Conversion Begins-Mixed Emotions! - 3A CommentHistorical mailing list - Frank GrunthanerTue, 17 Sep 2013 12:19:48 -0400...For the Vanagon, torque, especially at low revs, is drivability. In my experience with the 3A install, the engine was a tractor puller compared...
- Re: 094 5 Speed Kit Diesel ConversionsHistorical mailing list - Roy NichollWed, 4 Jan 2017 18:16:02 -0400...It might just eat bearings every 4-5 years - which I could accept. > TDI's don't like the high revs as much as...
- Re: Oil Change Screwup - HELP!Historical mailing list - Justin MayrandWed, 19 Jul 2006 21:36:32 -0400...the stutter > really only happened when the engine was at higher revs, I am > hopefully this will solve the problem. > > On that note, anyone...
- Re: AT Fluid Burping out of ATF Dip Stick Tube? Causes Trans
Malfunction, 88 AutoHistorical mailing list - robertmstewartThu, 20 Jul 2006 22:42:22 -0400...I can see the rpm�s go from about 875 >> and revs to about 1,000, then levels off again, normally at idle it...
- Re: My AT RebuildHistorical mailing list - Scott Daniel - TurbovansThu, 1 Jul 2010 20:00:11 -0700...engine revs but rearward motion is limited. It > did that again today starting cold after work Also found today when > leaving work that the...
- Re: Syncro tire dia. spec. - tolerances? Ask Mr. Science!Historical mailing list - DavidsonFri, 16 Apr 1999 15:53:30 -0700...if I had to take into account tire load and its influence on revs per mile *so would someone with brand new tires* - so...
- Re: No idle when engine coldHistorical mailing list - OlRivrRatSat, 25 Apr 2020 18:47:29 -0600...high teens for about 20 to 60Secs & smoothes out nicely once Revs are Up ~ After that Short WarmUp it will Idle well @ around 900...
- Re: Weird idle problem continuesHistorical mailing list - Dennis HaynesSat, 18 Oct 2014 17:04:06 -0400...All hooked up and the same situation--hard start, won't idle, 30 seconds later revs up to 3500 rpm and stays there. I...
- Re: Audible Coolant alarm opinionsHistorical mailing list - steve meassickSat, 3 Mar 2018 02:29:19 +0000...I can pretty much hear the speed of my engine revs and guess my tachometer. If I get a audible oil temp and presure...
- Re: digijet FI adjustmentsHistorical mailing list - Jonce FancherSun, 9 Apr 2006 16:10:17 -0400...It is just a pain to pull up to the light and it just surges or small revs. I did pull a vacuum line...
- Re: tach in an 85Historical mailing list - Scott Daniel - TurbovansWed, 8 Jun 2011 01:56:23 -0700...Your method for climbing hills seems more in line with what I would imagine - get the revs up so you are higher on the...
- this is how bad it gets folks , on $ 9K 86 Westy for saleHistorical mailing list - Scott Daniel - ShazamMon, 12 May 2008 20:04:36 -0700...Very stumbly under 2,000 rpm, after that revs out nicely. But the Transmission - it's noisy 8 on a scale of 10 in...
- Re: AT Fluid Burping out of ATF Dip Stick Tube? Causes Trans
Malfunction, 88 AutoHistorical mailing list - Dennis HaynesThu, 20 Jul 2006 23:08:49 -0400...I can see the rpm�s go from about 875 > and revs to about 1,000, then levels off again, normally at idle it...
- Re: 094 5 Speed Kit Diesel ConversionsHistorical mailing list - JasonThu, 5 Jan 2017 20:08:43 -0500...It might just eat bearings every 4-5 years - which I could > accept. > > TDI's don't like the high revs as much as...
- Re: More 89 Bluestar questionsHistorical mailing list - Steve CotsfordWed, 15 Jan 2014 20:21:08 -0500...When starting from cold, its clear that the idle mixture > is not right as I have to keep the revs up a bit for...
- tiico's, subies and diesels oh my...Historical mailing list - Christopher BerchinMon, 15 Jul 2002 23:22:24 -0400...I have made a version where you can input a known revs/mile of a tire and it back-solves for SLR based on...
- We went to Mammoth Lakes for a few days too....Historical mailing list - Daniel RotblattSat, 30 Jul 2011 22:49:05 -0700...It's an automatic, so it was one foot on the break and one on the gas pedal keeping the revs up until it...
- Re: AT Fluid Burping out of ATF Dip Stick Tube? Causes Trans
Malfunction, 88 AutoHistorical mailing list - John LauterbachThu, 20 Jul 2006 23:15:20 -0400...At the stop light with the brake on I can see the rpm�s go from about 875 and revs to about 1,000...
- Re: I rather drive the VanagonHistorical mailing list - Don HansonTue, 10 Jun 2014 22:01:24 -0700...speed as possible....I often crest at about 1mph with the revs going up and down as I try to re-gain traction... I...
- Re: digijet FI adjustmentsHistorical mailing list - John LauterbachSun, 9 Apr 2006 16:50:25 -0400...It > is just a pain to pull up to the light and it just surges or small revs. I > did pull a vacuum line...
- Re: My AT RebuildHistorical mailing list - Edward MaglottSun, 4 Jul 2010 16:23:19 -0400...engine revs but rearward motion is limited. It >>did that again today starting cold after work Also found today when >>leaving work that the...
- Re: Why do you like your Vanagon?Historical mailing list - Sean LynchSun, 22 Apr 2001 16:30:01 EDT...Even better, the guy couldn't stand the revs the engine turned at on the highway, and couldn't tolerate the acceleration/speed. So...
- Re: AT Fluid Burping out of ATF Dip Stick Tube? Causes Trans
Malfunction, 88 AutoHistorical mailing list - Mike CollumThu, 20 Jul 2006 22:54:54 -0400...I can see the rpm�s go from about 875 >>>and revs to about 1,000, then levels off again, normally at idle it...
- Re: AT Fluid Burping out of ATF Dip Stick Tube? Causes Trans
Malfunction, 88 AutoHistorical mailing list - Dennis HaynesThu, 20 Jul 2006 22:26:09 -0400...At the stop light with the brake on I can see the rpm�s go from about 875 and revs to about 1,000...
- Re: Clutch Adjustment ?Historical mailing list - Scott Daniel - TurbovansWed, 14 Sep 2011 19:01:15 -0700...clutch > chatter ) > Clutch slips when accelerating or going up hills ( engine revs increase, > but > van does not gain speed ) > > those are the common ones...