Search messages and discussions

Search preserved mailing-list messages and current email and website contributions. Current posts are searchable before weekly archival. Recovery gaps remain possible. Words are matched together; try fewer terms if needed.

Page 35+: 60 results shown for CONNECTOR.

Source-balanced relevance: matches from both collections are interleaved, with source dates breaking ties. Restoration time is not the original posting date.

• Re: Darrell Boehler's digifant tool
  Historical mailing list - Darrell Boehler
  Tue, 14 Jul 1998 11:13:03 -0500
  ...He then constructs a box with a male connector which plugs to the >>>| aforementioned female connector. The box contains electronics >supporting a >>>| series of...
• Re: Fuel flow issue 83.5 1.9 WBX
  Historical mailing list - Stuart MacMillan
  Mon, 25 May 2015 10:08:19 -0700
  ...Removed the input hose from the T connector and ran the pump again. Good fuel flow to the T pipe but none at the...
• Re: Vanagon Hall Effect Sensor alternatives
  Historical mailing list - Zeitgeist
  Sun, 4 Sep 2011 11:32:35 -0700
  ...and > connector, which if true makes it going NLA not a big deal at all." > > So, if you concocted your own connector and a...
• Re: 2.1L harness question
  Historical mailing list - Greg Potts
  Tue, 8 Mar 2011 19:38:16 -0500
  ...I think, because they are not different in color, they can be > exchanged. > An other double connector is going to the little heater of...
• Re: aftermarket tach
  Historical mailing list - David Beierl
  Thu, 2 Jun 2011 17:11:40 -0400
  ...The connector folds open (from the rear? senior moment here). Pin numbers are on the end of the connector; but pin one is empty...
• Re: Digitool Installed, totally Excellent!
  Historical mailing list - Marshall Ruskin
  Sun, 16 May 1999 00:10:15 -0500
  ...The other end of the short cable is a 25 pin female connector. This connector mates to a male connector, on the long cable...
• Re: Oil pressure light
  Historical mailing list - Dennis Jowell
  Tue, 11 Nov 2014 06:31:40 -0500
  ...It comes up and meets with another brown wire from the other oil > switch at a 2 pin connector by the thermostat housing. It...
• Re: Electric lock operator - replacement
  Historical mailing list - John Rodgers
  Thu, 21 Jul 2022 13:04:18 -0500
  ...forgot to add the link,,, > > > https://www.amazon.com/Baomain-Insulated-Connector-Electrical-Terminal/dp/B01MRRMVZL/ref=pd_lpo_2?pd_rd_i=B01MRRMVZL...
• temp gauge not working right...
  Historical mailing list - Dan N
  Wed, 8 Aug 2018 16:52:40 -0700
  ...So I did this: - swap a good instrument cluster from a running van - test the voltage at the sensor connector --> 10.5V - ground the...
• Re: 1985 Westy Vanagon shutters, dies, and then resurrects... help.
  Historical mailing list - Karl Wolz
  Wed, 10 Nov 2010 13:17:49 -0700
  ...bad connections (pull each electrical connector and coat with dielectric gel to preserve a good contact); weak or missing grounding connectors (same as above...
• Re: Newbie with newbie questions (please be patient)
  Historical mailing list - Austin
  Sun, 24 May 1998 00:50:37 -0700
  ...When this happened to me it turned out to be a connector in the engine bay that had never been assembled properly - the little...
• Re: Tachometer/fuel gauge from '89 Vanagon into my '81
  Historical mailing list
  Mon, 20 Sep 1999 23:28:08 EDT
  ...basically, you have to switch the pins around in the multipoint pin connector, and run a wire from your coil to #14 pin on...
• Re: 85 Westy Brakelight Problem
  Historical mailing list - David Beierl
  Fri, 23 Mar 2001 15:37:38 -0500
  ...From switches, 1 mm r/bk to terminal T4a (probably a 4-position connector behind dash), then bk/r to pin three of T7...
• Re: Loss of power - super hot muffler & Missing Conductor.
  Historical mailing list - Mike Finkbiner
  Thu, 12 Dec 2002 15:50:19 +0000
  ...So, on mine it's shielded from the ECU to the connector, but from that connector to the O2 sensor it is not. - Mike...
• Re: vanagon Digest - 11 Nov 2004 - Special issue (#2004-1089)
  Historical mailing list - Don Spence
  Fri, 12 Nov 2004 09:05:16 -0700
  Alvaro I'm going to place my money on a grounding, connector or wire problem on something close to or connected to the ICU...
• Re: [WetWesties] blinkin' buzzers!
  Historical mailing list - Loren Busch
  Tue, 17 Nov 2009 10:31:06 -0800
  ...80% or more of failures in electrical/mechanical sytems will be mechanical! And connectors, battery terminals, etc. are mechanical.
• Re: American Automobiles, English Motorcycles, Women, and Vanagons
  Historical mailing list - Karl Wolz
  Mon, 13 Nov 2000 14:05:22 -0700
  > Coil hot wire decided to fracture off the connector, at the coil. > Just didn't see it at 8:30 last evening, on the...
• Re: Need Alternator P/N's Identitied
  Historical mailing list - George Goff
  Fri, 10 Jan 2003 08:12:58 EST
  ...Some had a spade connector there and others had a tiny threaded stud. >> Mark, Exactly as you said. Thanks. George
• Re: Coolant part, H shaped valve, for '84-'85 vans
  Historical mailing list - Matthew
  Thu, 26 Feb 2004 12:39:39 -0800
  www.volkscafe.com >>I am looking for part 025 121 438, a small H-shaped coolant hose >>connector, near the expansion tank. I can...
• Re: LP tank refurb
  Historical mailing list - Richard A Jones
  Tue, 20 Jun 2006 22:12:57 -0600
  ...Go to http://www.campingworld.com/browse/categories/index.cfm?deptID=3&catID=302 for info about POL vs QCC (the newer connector on...
• Re: question about electrical inlet
  Historical mailing list - Mike
  Fri, 20 Feb 2009 21:46:48 -0500
  ...I removed , replaced my corroded outlet using a proper RV hookup connector and put it all back together. The gasket was fine and I...
• Re: Solar Panel outdoor electrical connect
  Historical mailing list - Rocket J Squirrel
  Tue, 28 Jun 2011 17:14:37 -0700
  Now you see, what I'm-a gonna do is put my solar panel input connector inside the spot where the (unused) city water...
• Re: The Comedy of Errors
  Historical mailing list - Stephen Grisanti
  Thu, 25 Aug 2011 17:05:04 -0700
  ...Instrument pod removed, master cylinder exposed and drained, new genuine VW switches in hand - pulled the connectors from the old switch and checked with...
• Re: Oil pressure light
  Historical mailing list - Jim Felder
  Mon, 10 Nov 2014 15:01:22 -0600
  ...It comes up and meets with another brown wire from the other >> oil switch at a 2 pin connector by the thermostat housing. It...
• Re: Radiator fan- '91 Carat
  Historical mailing list - sparklegirl500
  Tue, 31 May 2016 21:37:43 +0000
  ...Remove the connector & > short pins 1&2 or 1&3. Fan should run. I think 1&2 are low speed & 1&3 > are high...
• Re: Temp II Sensor Release
  Historical mailing list - JRodgers
  Sun, 29 Dec 2013 20:53:34 -0600
  ...This effort was just to separate the connector from the sensor - not remove the sensor itself. John On 12/29/2013 8:26 PM...
• Stray wires around the fuse block Help!!
  Historical mailing list - Max Wellhouse
  Fri, 20 Mar 2009 20:02:53 -0500
  ...One pair are set up as male spades in a T-2 type connector at right angles to each other. The wires are red...
• Re: CIGARETTE LIGHTER REMOVAL
  Historical mailing list - Davidson
  Mon, 6 Dec 1999 10:23:27 -0800
  ...I've >tried in vain to pull the connector off by reaching inside the dash but it >doesn't pull straight off. Using a...
• cooling problems
  Historical mailing list - Anthony Bailey
  Sat, 8 Sep 2001 20:04:41 -0500
  ...At home, I checked the electrical connections on the overflow tank, one of which had some corrosion on its contacts and the connector, I...
• Re: Diesel Instrument Cluster Blue Ribbon: Glow Plug Light Wiring Confirm Please?
  Historical mailing list - Neil N
  Mon, 21 Aug 2017 16:51:52 -0700
  ...Some time ago, I replaced the OEM T14 blue ribbon male connector with a different set of connectors. At that time I'd ruled...
• Re: Tach install from vanagon to vanagon
  Historical mailing list - Tom Buese
  Tue, 2 Jan 2007 17:19:54 -0700
  ...Move the wires on the clock dash model to the same >> positions >> as the tach model 14 pin connector. The connector opens up at...
• Re: '86 Vanagon
  Historical mailing list - David Bayer
  Tue, 11 Nov 1997 10:52:12 -0800
  ...Check (or have someone check) the 3 wire connector coming out of the distributor. The elbow can crack and the 3 uninsulated wires inside...
• Re: 1987 Oxygen Sensor Wiring 2.1 liter Digifant MV engine
  Historical mailing list - David Beierl
  Sun, 24 Feb 2002 17:30:54 -0500
  ...Now you have. <g> >Anyway, this fat green "double" wire has a connector crimped onto the middle >"core" wire, which is at present, rather...
• Thanks for the help
  Historical mailing list - Rob & Lrae Winterkorn
  Wed, 20 Oct 1999 16:40:31 -0500
  ...Installation is as easy as removing the connector to the AFM and installing in between it and the connector. A clue I was looking...
• Re: Looking for information on installing a 85 instrument panel intoan 83.5
  Historical mailing list - mark drillock
  Thu, 9 Jan 2003 10:33:27 -0800
  The wiring on the 14 pin connector is VERY different for early clock dashes versus tach dashes. Most of the many colored wires must...
• Engine sounds like it doesn't have any oil
  Historical mailing list - Per Martin Joraholmen
  Sun, 20 Apr 2003 19:27:55 +0200
  ...Second picture is a connector underneath the thermostat that was disconnected. I have now connected it with no change in behaviour of the engine...
• Disconnecting the Oxygen Sensor
  Historical mailing list - tabe johnson
  Wed, 6 Oct 2004 13:38:33 -0400
  Disconnecting the oxygen sensor connector is a good thing to remember. When we first got our van, the J-pipe broke upstream of the...
• Re: Michael's repairs - more info. needed.
  Historical mailing list - Michael Knight
  Mon, 24 Jan 2005 17:56:37 -0600
  ...AAG - Larry Word >So many repairs and I don't understand 2 of them: >(1) Replaced the plastic connector for the Hal Sender on...
• Re: Harbor Freight Circuit Tester was D15 connector revealed
  Historical mailing list - Scott Daniel - Turbovans
  Wed, 9 Nov 2011 12:55:50 -0800
  ...Re: [VANAGON] Harbor Freight Circuit Tester was D15 connector revealed On Tue, Nov 8, 2011 at 9:47 PM, Scott Daniel - Turbovans <scottdaniel@turbovans...
• Where do I find a new door lock actuator harness adapter?
  Historical mailing list - Zeitgeist
  Sat, 27 Jan 2007 14:33:04 -0800
  ...So, now, three weeks later, it arrives with a superseded part number and a different plug connector, which won't work with my existing...
• Re: do are vanagons even charge our batteries?
  Historical mailing list - Kim Brennan
  Sat, 5 Jan 2008 20:45:14 -0500
  ...I have one Vanagon where I started to investigate the wiring and the connector on that blue wire fell right off the wire. Stripping...
• Re: Any Guesses ~~ Now For Sure Your Turn Please ~ Update
  Historical mailing list - David Beierl
  Wed, 7 Jul 2021 14:11:08 -0400
  > > Another Oddity > Coolant Level Warning Light Flashes Constantly with Key On > > Even with Connector Jumped & Relay 43 Removed ~ Any ideas on that ~ > Either gauge...
• Re: Rear Hatch struts
  Historical mailing list
  Tue, 2 Apr 1996 11:39:09 -0500
  ...Although none were listed for vanagon, I found two the same size, with similar connectors. I think they cost about $20 ea. Have worked...
• Re: Vanagon oil pressure switches,or the lack thereof!!
  Historical mailing list
  Thu, 7 Oct 1999 22:15:35 EDT
  I saw these "L" shaped connectors in a pack at Radio Shack the other day. Made a mental note. Hope this helps ya, Ken...
• I lied, so sue me
  Historical mailing list - Walter Evens
  Thu, 21 Feb 2002 10:06:30 -0800
  ...a switch on the firewall, but why? The pump has two connectors and one wire, is this normal? Thanks, Walter Evens Hesperia, CA, USA...
• Re: Braided Flexible Tiico Exhaust Connection
  Historical mailing list - Fitz-Randolph, Douglas
  Mon, 12 Aug 2002 14:23:17 -0400
  "Does anyone know where to get such a part" I've seen these braided flex connectors in the bins with all the other misc...
• Re: turn signals suddenly out
  Historical mailing list - Ken Lewis
  Thu, 5 May 2005 16:51:47 -0400
  ...Some connectors have two wires on them, which I cut off and crimp on individual ones. Ken Lewis http://neksiwel.20m.com/
• Re: lpg inlet connector type?
  Historical mailing list - Loren Busch
  Tue, 17 May 2005 09:18:04 -0700
  RE: Propane Adapters Jim, are you saying that all that is needed to attach an external tank to my Westy is that simple adapter...
• Depressing Fender bender Need right front passenger side tirn signal assembly with orange lens & other
  Historical mailing list - TC
  Thu, 20 Jul 2006 08:12:54 -0700
  ...front bumper cap 1-right front turn signal assembly (3 spade connectors) with lens 1-bra I gonna cover it up for the summer :)
• Re: Headlight swtich diagnostics?
  Historical mailing list - Michael Diehr
  Mon, 22 Dec 2008 17:02:03 -0800
  ...There are a bunch and they are clustered >>> together on a grounding "star" connector. Check each ground on >>> these >>> two connectors and clean them...
• Re: Another D15 connector failure example
  Historical mailing list - Alistair Bell
  Sat, 19 Feb 2022 12:14:23 -0800
  ...The >>>> corresponding white connector on the wiring loom was really badly >>>> burned. Appeared to me to be chronic heat via bad contact . >>>> >>>> Alistair
• Re: Zodi Tent Heaters
  Historical mailing list - Matt Roberds
  Wed, 29 Aug 2007 00:34:21 -0500
  ...You could also use a two-pin connector; the FLAPS and/or an RV shop sells one that's basically half of a common...
• Re: Both temp light and gauge not working
  Historical mailing list - David Beierl
  Sun, 26 Mar 2017 17:25:13 -0400
  ...If the gauge pegs and blinks then the problem is *not* at the panel connector but farther back, likely at sender connector. If no...
• Re: lighting harness for trailer question
  Historical mailing list - David Marshall
  Mon, 20 May 2002 10:58:17 -0700
  ...I cut it so there was about 15 cm of wire coming from the connector. I then crimped some mail spade connectors to the...
• Re: Still sputtering....
  Historical mailing list - John Anderson
  Wed, 23 Sep 1998 23:37:06 -0400
  ...A tip here is that you can usually only find the yellow size crimp connector for such a large stud size, I simply remove...
• Re: New iginition coil behavior
  Historical mailing list - Dan N
  Mon, 30 Aug 2021 10:51:57 -0700
  ...if the pair of >> wires in >> > the large white plastic connector (at the 2 prongs post) are reversed, >> the >> > van cranks but won't...
• Re: O2-sensor blues and more on '84 1.9L engine
  Historical mailing list - Dennis Haynes
  Sun, 14 Aug 2011 22:29:18 -0400
  ...When the O2-sensor is connected and I measure the voltage between the connector and engine ignition control module heat shield, I am getting...
• Re: Buzzer starts, different instrument, FIXED
  Historical mailing list - HotelWestfalia
  Mon, 23 May 2011 21:51:11 -0700
  ...Just pry the 6 pin connector from > the back of the speedo. That exposes the 6 pins in the back of the speedo > housing...
• Re: alternator questions/ just bought a reman.alt..
  Historical mailing list - Mark Drillock
  Fri, 24 Jun 2005 09:58:08 -0700
  ...I plugged my blue wire to the blade connector to the farthest side blade on the alt, but the dummy light came on bright...
• RE: Dying in the rain 2
  Historical mailing list - Tom Brunson
  Thu, 3 Jul 97 18:44:51 UT
  The Bosch Digifant sensor on the '86 up actually does have two wire connectors - one is for the sensor itself, and the other is...