Search messages and discussions

Search preserved mailing-list messages and current email and website contributions. Current posts are searchable before weekly archival. Recovery gaps remain possible. Words are matched together; try fewer terms if needed.

Page 6+: 60 results shown for Intake manifold.

Source-balanced relevance: matches from both collections are interleaved, with source dates breaking ties. Restoration time is not the original posting date.

• Re: Rough starting in cold weather
  Historical mailing list - Kent Christensen
  Sun, 12 Dec 1999 10:12:11 -0700
  ...Since there's only one, it's not close to a particular cylinder but rather upstream in the intake manifold. I find it interesting...
• Re: Understanding AFC fuel injection--question
  Historical mailing list - Larry Alofs
  Sun, 30 Dec 2001 19:52:52 -0600
  ...auxillary air regulator is open, and air is diverted to the intake manifold, thus bypassing the throttle body. This book says that this enables...
• Re: Idle and Timing /Joel Walker
  Historical mailing list - Joel Walker
  Thu, 12 Jan 95 19:47:05 CST
  ...i've never heard of it being 'common' to find vacuum leaks at the heads, but it's certainly possible if the intake manifold...
• Re: Need Help with Engine Speed Wildly Surging at Idle
  Historical mailing list - Bostig Eng
  Sun, 26 Nov 2006 15:55:52 -0500
  ...at Idle since the idle speed screw has little effect, trouble may be significant vacuum leak, perhaps at the throttle body/intake manifold interface.
• 2.1WBX running rich
  Historical mailing list - Van Pelt, Steve
  Thu, 15 Jan 2015 11:02:58 -0600
  ...cleaner to see if idle changes when I spray around the intake manifold hoses. New air cleaner installed. The idle also is kind of...
• Re: Leaking head gasket-diesel/TD conversion
  Historical mailing list - Mike Catlin
  Wed, 4 Dec 1996 10:48:18 -0800 (PST)
  Brent Taylor wrote: > > I have added additional stress by adding 85' qntm turbodiesel intake and > > exhaust... Are you using the standard diesel injector pump...
• Re: Vanagon carb needed, with waterboxer manifolds
  Historical mailing list - Richard Green
  Wed, 24 Aug 2005 22:04:08 -0500
  ...The > intake port configuration on the head is different than any of the > aircooled boxers so I need a carb manifold that was made...
• Re: Vanagon carb needed, with waterboxer manifolds
  Historical mailing list - Stan Wilder
  Thu, 25 Aug 2005 11:01:41 -0500
  ...the factory stock jets. > > > >The VW part # for the carb air intake manifold is: 025-129-713 A be sure to ask the Ebay...
• Re: EGR on '81 Vanagon Westie
  Historical mailing list - Dennis Haynes
  Wed, 10 Sep 1997 01:41:35 UT
  ...So the way it is set up, the egr intake hangs down around the muffler, feeding unfiltered air to the intake manifold at all...
• Re: Manifold measuring - is this right?
  Historical mailing list - Mike \"Rocket J Squirrel\" Elliott
  Wed, 24 Oct 2007 17:34:44 -0700
  ...Bentley's doesn't give >> a procedure for checking intake manifold vacuum so I'm winging it. I let >> the engine warm up so...
• My mechanic made a 2,000 km house call
  Historical mailing list - Malcolm Stebbins
  Fri, 30 May 2003 18:56:53 -0700
  ...You see I have a Solex carb gerry-rigged to the intake manifold of a 1600 cc beetle, all hooked up to 91 syncro...
• Re: Poor Hot Start Discovery - midway through solution
  Historical mailing list - neil n
  Sun, 26 Aug 2012 20:09:17 -0700
  ...purge valve goes downstream of the AFM into the "T" at intake manifold. This is the hose I was referring to. Like this: https...
• Weber carbs for VW bus (fwd)
  Historical mailing list - Jeffrey Olson
  Wed, 30 Oct 1996 21:59:55 -0800 (PST)
  ...Weber carbs for VW bus I have a pair of Weber 34 ICT carburators for sale, with linkage and intake manifolds for Volkswagen buses...
• Re: Cooking the Roll----
  Historical mailing list
  Fri, 1 Mar 2002 02:21:18 EST
  ...drove--- > > no but once i put some aluminum foil over the intake manifold of my Audi turbo and grilled a cheese sandwich and baked...
• Re: port matching intake manifolds to heads
  Historical mailing list - Pascal Giasson
  Mon, 21 Jan 2008 21:03:12 -0500
  ...distinguish >them is to look at the chamber the 1.9 intake valve relief does not extend >out to the edge of the cylinder...
• Re: VW Caravelle C, Turbo Diesel... info on turbo...
  Historical mailing list - brent taylor
  Tue, 31 Mar 1998 22:42:01 +0900
  ...Also check that the vacuum hose that connects from the intake manifold to the injection pump is connected. If you can get a pressure...
• Re: 1982 air cooled vanagon intake gasket
  Historical mailing list - Jake Beaulieu
  Thu, 25 Sep 2003 12:34:00 -0700
  ...I diagnosed the problem by spraying carb cleaner on the manifold. The idle immediately shot up. At first I though it was the injector...
• Re: Fuel Filter "Update" Results
  Historical mailing list - David Beierl
  Sat, 27 Jun 2009 14:45:15 -0400
  At 02:08 PM 6/27/2009, neil N wrote: >at higher engine RPM's, (intake) manifold absolute pressure rises, >more vacuum applied to...
• Re: 74 Westy Cold Weather Problem
  Historical mailing list
  Wed, 6 Mar 1996 23:09:41 -0500
  ...a heat riser system to use hot exhaust to heat the intake manifold? In upright engines, lack of these two things causes the symptoms...
• Re: Fridge won't come out...
  Historical mailing list - neil N
  Sun, 11 Nov 2007 09:34:37 -0800
  ...One other spot it will hang up on, is the exhaust/intake tubes and/or the manifold they attach to. The manifold can get...
• Re: Dennis has a question-Carbureted 1.9L engine!
  Historical mailing list - Rocket J Squirrel
  Mon, 7 Apr 2014 18:27:20 -0700
  ...On 04/07/2014 05:01 PM, Dennis Haynes wrote: > Does anyone know if the intake manifold from a European carbureted 1.9 > engine...
• Re: EFI to Carbs, some fun here
  Historical mailing list - Craig Standley
  Fri, 29 May 1998 10:20:57 -0700
  > > VW vent to fairly long extremes in > > the old engines to route exhaust gasses up to warm up the intake manifolds. > > The warm manifolds...
• Re: Carbs on my '91 Westie Syncro---"The Story"
  Historical mailing list - Pfunky
  Wed, 25 Mar 1998 18:09:09 EST
  In a message dated 3/25/98 5:08:04 PM, you wrote: << Plus if someone can come up with an aftermarket intake manifold...
• Re: flue vent assembly
  Historical mailing list - Edward V Barger
  Mon, 16 Apr 2018 14:57:11 -0700
  ...installed, make sure the intake/exhaust manifold is "square" to the body > before re installing the flue parts; that manifold tends to get misaligned...
• Re: Vanagon carb needed, with waterboxer manifolds
  Historical mailing list - Jeff Palmer
  Wed, 24 Aug 2005 22:27:06 -0500
  ...The > > intake port configuration on the head is different than any of the > > aircooled boxers so I need a carb manifold that was made...
• Re: Rear Trailing Arm Replacement Fun! Welding Aluminum with a MIG.
  Historical mailing list - Neil N
  Mon, 19 Jan 2015 10:23:49 -0800
  ...One of these days I'll take the plunge on a spool gun purchase and try modifying the intake manifold on my Jetta swap...
• Junkyards and Rialtas
  Historical mailing list - David Schwarze
  Mon, 13 Feb 1995 09:22:18 -0800 (PST)
  ...2 carbs 2 manifolds throttle linkage crossbar manifold crosspipe air cleaner housing and mounts air intake preheater valve misc. hoses, elbows, solenoids, hardware I...
• Re: Fuel tank pressurized
  Historical mailing list - Robert Donalds
  Wed, 12 Feb 2003 08:52:56 -0500
  ...Trace the plastic purple vacuum hose from the intake manifold to the valve. the valve most likely has a hole in it and that...
• RE: A.C. causing van to die
  Historical mailing list - Maher, Steve (SD-MS)
  Wed, 26 Jun 1996 10:29:00 -0700 (PDT)
  ...But does it have any vacuum connections to the intake manifold? If so, any chance any of them are cracked/leaking/fallen off? A...
• Re: Plugging leaks in intake manifold
  Historical mailing list - Mike \"Rocket J Squirrel\" Elliott
  Fri, 28 Sep 2007 12:07:17 -0700
  ...I believe a good test of the air intake system is to measure the > manifold vacuum you are generating. I combed the archives on...
• Re: Poor Hot Start Discovery - midway through solution
  Historical mailing list - David Beierl
  Mon, 27 Aug 2012 03:26:31 -0400
  ...purge valve goes downstream of the AFM into the >"T" at intake manifold. This is the hose I was referring to. I was even...
• Re: A/C tranny in my na diesel!
  Historical mailing list - Scott Daniel - Turbovans
  Sat, 27 Oct 2012 20:58:07 -0700
  ...if you do turbo a 1.6 ..the turbo intake manifold you want is the jettta/golf/rabbit on, and not the Quantum one...
• Re: Conversion Choices
  Historical mailing list - Robert Keezer
  Sun, 2 Sep 2012 13:57:10 -0700
  ...The intake manifold about 10 lbs Lets add it all up and say this cylinder head, the intake man, and all that's attached...
• GETTING STARTED
  Historical mailing list - Russ Gunter
  Sat, 19 May 2001 19:07:03 EDT
  ...I can spray some gas into the intake manifold and it will fire off and run great for a few seconds and then die...
• 1.8l I-4 engine complete FS
  Historical mailing list
  Fri, 26 Feb 1999 23:56:59 EST
  ...I will sell the complete motor with wiring harness, waterpump and hoses, intake and exhaust manifolds, injection setup, and even alternator (if you respond...
• Head gasket
  Historical mailing list - Dan Erlandson
  Mon, 16 Jun 2003 14:05:55 -0400
  ...I can leave the injectors/fuel rail attached to the manifold, No? It looks like the fuel rail is bolted onto the intake and...
• Re: 2.0L Conversion 5K update, longish
  Historical mailing list - Randolph Feuerriegel
  Tue, 21 Sep 1999 11:50:19 -0700
  ...The head and intake manifold are different than a VW, but you can put a 1.8 GTI head and manifold on my 2...
• Intake air flow, improvement possible?
  Historical mailing list - Gary Lee, Vanagon Racks
  Sat, 27 Nov 2004 15:53:59 -0700
  ...The stock air filter - throttle body - intake manifold system is capable of flowing enough air for the stock engine up to redline. So, increasing...
• Re: Fear of Max Cool
  Historical mailing list - The Gunnings
  Mon, 31 Jul 2000 06:24:09 -0400
  ...Little switch provides extra air to the intake manifold. If this switch (idle stabilizer valve) is not activating something may be electronically kaput. Or...
• Re: Syncro "factory" vacuum source
  Historical mailing list - Larry Hamm
  Thu, 18 Jan 2001 12:09:29 -0700
  ...Can someone explain exactly where the > intake manifold vacuum source is "supposed to be" for the Syncro locking > differential vacuum system? The Bentley doesn...
• Re: Questions for you conversion experts
  Historical mailing list - Scott Walker
  Wed, 6 Aug 2003 13:52:52 -0400
  ...What cylinder head, intake manifold and exhaust manifold combination are you using and was there any additional cutting/grinding required to fit the 2...
• Re: turbo diesel vanagon/quantum air intake how to
  Historical mailing list - David Marshall
  Mon, 22 Apr 2002 23:05:09 -0700
  You can just buy a driver side motor mount from Fast Forward and not have to mess around with all this other manifold stuff...
• Re: Vacuum
  Historical mailing list - Ralph Meyermann
  Tue, 16 Feb 2016 11:00:53 -0600
  Usually source is somewhere on intake manifold between throttle body and cylinder heads, it powers the brake booster and probably a few other components...
• TIICO...Diesel brake booster hose needed
  Historical mailing list - Sean B.
  Wed, 3 Oct 2001 17:20:51 -0700
  ...booster hose (ridgid plastic hose with one-way valve, goes from intake manifold to driver's side of firewall). I was thinking that maybe...
• Re: ENGINE SWAP QUESTION
  Historical mailing list - Kim Brennan
  Sat, 10 Aug 2002 14:57:10 EDT
  ...It appears to be essentially the same as any inline 4 VW except >for the intake manifold. Yeas, nays or comments.. Check the archives...
• Re: tiico conversion vs. other I4 conversions
  Historical mailing list - Data Services
  Wed, 2 Jan 2002 22:41:13 -0500
  ...The other major > > difference is the confiquration of the intake and exhaust manifolds. This > > is why the 2.0L crossflow as used in A3...
• Re: Air intake "scoops"
  Historical mailing list - Bob Donalds
  Thu, 16 Dec 1999 09:14:24 -0500
  ...cooler engine comparments and intake manifold temps as well as the air temps at the intake make a big diff as to the engines...
• Re: Contents of Head Gasket Kit 025 198 102A 025198102A (repost)
  Historical mailing list - Michael Knight
  Tue, 29 Mar 2005 17:14:47 -0600
  ...of Head >20) Intake manifold to head gasket, as found on my 2.1L engine No sealant. >21) Another intake/head gasket? For 1...
• Re: Converting EFI to Carberator
  Historical mailing list - Malcolm Stebbins
  Fri, 5 Mar 2004 17:19:11 -0800
  ...The trick to conversion (EFI to carb) is to get a good intake manifold. Try CIP1.com They have set ups for aircooled vans...
• Re: Experiment
  Historical mailing list - Jim Arnott
  Tue, 27 Jul 2004 20:43:06 -0700
  ...Jim >>> Vanagonians, >>> >>> I want to experiment (just for fun) with doing water injection, such >>> as a >>> mister into the intake manifold. Can any harm...
• Interior & 2,1/digijet parts in Seattle
  Historical mailing list - Cunegonde
  Fri, 11 May 2018 11:59:06 -0700
  ...WORKING Digijet ECU WORKING Digijet AMS unit FREE (or shipping costs) 2,1l/Digijet intake system from airbox to intake manifold 2,1l A...
• fuel line replacement
  Historical mailing list - James Creech
  Wed, 10 Jan 2001 09:43:15 -0500
  ...removing and cleaning the air intake manifold runners, and replacing their gaskets replacing the large diameter, short length rubber hoses on those runners replacing...
• Parts To Make the 1.9 NA Diesel a Turn-Key
  Historical mailing list - Dana Morphew
  Sat, 16 Jan 1999 09:32:47 -0800
  ...complete? 1) exhaust manifold (I'm uncertain that the exhaust ports in the 1.9 head alow this), 2) intake manifold (will need to...
• Re: Powder Coat ?????
  Historical mailing list - Campoli Bernard DLPC
  Tue, 29 Jun 1999 07:37:55 -0500
  ...Same thing happened to me JP,On another project(1995),had 16valve intakes manifolds,valve cover,exhaust manifold,and down pipe JET-HOT coated...
• Re: Welcome to Turbonator.com !
  Historical mailing list - Stan Wilder
  Thu, 1 Sep 2005 10:12:44 -0500
  ...of air do when it > >> reaches the intake manifold? It stops swirling as > >> the four intake runners draw air from both sides > >> of the...
• Re: FI Parts Questions
  Historical mailing list - John Anderson
  Fri, 13 Sep 1996 17:56:58 -0400
  ...air distribution manifold (the clack thing the 4 intake pipes come out of) If you look behind the distributor, under the manifold, under the...
• Re: Some dometic notes
  Historical mailing list - Jim. Felder
  Sun, 30 Jun 2019 17:15:32 -0500
  ...is the O rings that seal the > > corrugated intake and exhaust tubes to the (aluminum?) manifold. It > > was likely a needless thing to do...
• Sale Prices for Parts
  Historical mailing list
  2 Nov 95 11:54:52 -0600
  ...set of 4 intake manifold hoses 1.8l, 2.0l $9.95 039.133.241BP set of 4 intake manifold hoses 1.7l $9...
• Re: Digifant II 'Diesel' Conversion Pics
  Historical mailing list - Alistair Bell
  Wed, 19 Sep 2001 08:44:59 +0000
  ...Also, we sort of killed > the A2 intake manifold when we combined it with an A1 manifold to make a > short "A2 manifold" that...
• Excessive Hydrocarbons
  Historical mailing list - David Schwarze
  Sat, 23 Sep 1995 23:10:36 -0700 (PDT)
  ...Cool! So, like, I ran down to the parts place and bought 8 new intake manifold gaskets (hey, they are $0.30 each!). Whip...