Search messages and discussions

Search preserved mailing-list messages and current email and website contributions. Current posts are searchable before weekly archival. Recovery gaps remain possible. Words are matched together; try fewer terms if needed.

Page 1+: 60 results shown for CONNECTOR.

Source-balanced relevance: matches from both collections are interleaved, with source dates breaking ties. Restoration time is not the original posting date.

• Does O2 sensor plug into green connector?
  Historical mailing list - Conrad Klahn
  Mon, 10 Nov 2003 17:31:10 -0600
  Hi, Somehow I ended up with two female connectors - maybe there's supposed to be some kind of adapter between the two? The Bentley...
• [Fwd: Sender Connectors' Wires]
  Historical mailing list - Georgios A. Stylianides, PhD
  Wed, 2 Jun 2004 15:22:47 -0400
  ...The other connectors of the other senders/sensors are very similar. Actually, all connectors and senders have one thing is common, as expected: ~ connector...
• Re: loose blade conncectors
  Historical mailing list - Andrew Grebneff
  Tue, 20 Oct 2009 08:23:26 +1300
  To tighten a femals spade connector in a connector-block: The connector has a tab which springs out of the bottom of the connector...
• Re: Does O2 sensor plug into green connector?
  Historical mailing list - Mike Collum
  Mon, 10 Nov 2003 18:48:26 -0500
  > Hi, > > Somehow I ended up with two female connectors - maybe there's supposed > to be some kind of adapter between the two? > > The Bentley...
• Re: Temp Warning Light Mystery
  Historical mailing list - Rico Dagastino
  Sun, 20 Sep 1998 10:52:33 EDT
  It is not necessary to "crimp" the connectors together. But it is necessary to check the connectors to ensure a tight fit. The low...
• Re: Connectors, where to find
  Historical mailing list - neil n
  Tue, 1 Jan 2013 17:47:09 -0800
  Your local auto parts place should have trailer light connectors. image of what I mean: http://image.made-in-china.com/2f0j00TveaSGhtVofW/Molded-Trailer...
• Re: Location of Electrical Connector T7
  Historical mailing list - Dennis Haynes
  Mon, 11 Feb 2002 18:51:06 -0500
  Round connector in the black box, left front of the engine compartment. Dennis -----Original Message----- From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com...
• Re: where to buy H4 connectors for lights (was RE: Ecode light report )
  Historical mailing list - Chris S.
  Tue, 15 Jun 2004 11:04:30 -0500
  ...Just ask them for a headlight connector for any old American car that uses sealed beams. Chris S.
• Electrical connectors
  Historical mailing list - Tom C
  Fri, 11 Mar 2022 12:48:31 -0500
  Does anyone know where to get the electrical connectors that go into the big white connector for the instrument cluster? And all those other...
• Bosch ECU connectors
  Historical mailing list - Roger Bowman
  Thu, 7 Oct 1999 07:39:11 -0700
  ...pay $193 from Baum Tools) a breakout connector; that is to say, a combination male and female 25 pin connector that I can use...
• D15 connector revealed
  Historical mailing list - Alistair Bell
  Wed, 2 Nov 2011 11:08:38 -0700
  Due to the no start situation I had yesterday, I pulled the fuse panel and had a look at the D15 connector. Pics and...
• Re: D15 connector revealed
  Historical mailing list - Kim Brennan
  Wed, 2 Nov 2011 15:17:50 -0400
  Oh, I neglected to mention, the replacement connector I got was from one of Chris Turner's parts vanagons. On Nov 2, 2011, at...
• Location of Electrical Connector T7
  Historical mailing list - Tim Hannink
  Mon, 11 Feb 2002 17:54:16 -0500
  ...According to page 97-103, connector T7 is a "seven point, in wire distrib., eng. compart". Anyone know where is this connector is exactly...
• Re: Temp 2 Sensor Questions
  Historical mailing list - TC
  Tue, 10 Jul 2007 20:40:33 -0700
  >The sensor connector is the same as an injector > connector. Aftermarket pigtails are available or you can get the good > stuff from the dealer...
• Re: Headlight Relay Kit Problems
  Historical mailing list - Brett Ne
  Sun, 1 Dec 2013 09:29:54 -0800
  ...If the wire cannot be fit back into the connector & crimped, any auto parts store should have generic replacement spade connectors that will work...
• Re: Electrical connectors
  Historical mailing list - Dan N
  Fri, 11 Mar 2022 11:44:49 -0800
  Do you have a pic or a link of that white connector? Is it the one at the end of the blue ribbon? On...
• Re: fan wiring question
  Historical mailing list - Hector Zapata
  Thu, 16 Aug 2001 19:05:56 -0700
  > the top connector gets color X from the van-black > the left connector gets color Y from the van-red > the right connector gets...
• Re: Tiico/OBDII connector
  Historical mailing list - Kenneth Wilford
  Mon, 26 Aug 2002 11:35:24 -0400
  If I remember correctly the wire ends in the supplied Tiico connector are too big to fit in the OBDII connector. I tried what...
• Re: Help! Pwr. Mirrors PITA!!
  Historical mailing list - Joel Walker
  Thu, 02 Jan 97 21:23:55 CST
  ...this lets you pull the metal connector out of the plastic connector. then you can feed the wires/metal connectors through the hole in...
• Re: where to buy H4 connectors for lights (was RE: Ecode light report )
  Historical mailing list - Joel Walker
  Tue, 15 Jun 2004 20:51:40 -0500
  ...Pico is the brand, and it is a black plastic connector with the wires already installed into it. and about six inches of wire...
• Re: What could have gone wrong?
  Historical mailing list - rpc
  Mon, 5 May 2008 20:17:27 -0700
  ...The new sensor connector seems to have a simpler design than the one I took off and wont accept the old connector--doesn't...
• Re: 5/16" space connectots for the head lights
  Historical mailing list - TC
  Tue, 22 May 2007 15:52:43 -0700
  > I duuno none of the so called FLAP here in Vic BC > have the 5/16" female spade connectors > with that tab that keeps...
• Re: Location of Electrical Connector T7
  Historical mailing list - Laurence Smith
  Mon, 11 Feb 2002 18:09:51 -0500
  ...According to page 97-103, > connector T7 is a "seven > point, in wire distrib., eng. compart". Anyone know where > is this connector > is exactly...
• Solar Panel outdoor electrical connect
  Historical mailing list - Troy
  Thu, 30 Jun 2011 21:44:12 -0800
  I wanted to thank everyone who responded to my original question about connectors for solar panel electrical connectors. There are definitely some ingenious ideas...
• Re: Headlight Switch in the dark.
  Historical mailing list - Al Knoll
  Sat, 23 Jan 1999 13:57:52 -0800
  Willie, if you carefully examine the plastic plug that has the wires going into it you'll notice that the crimped on metal connectors...
• Re: Gas heater wiring
  Historical mailing list - Frank Condelli
  Sun, 1 Nov 2015 04:33:13 -0500
  ...connector ) and 2 > "outside" connectors .250 inch spades tag as connector K and connector 31. > > connector K is "unassign" - "free" - "nothing connects to it...
• Re: What could have gone wrong?
  Historical mailing list - Paul Guzyk
  Mon, 5 May 2008 07:12:54 -0700
  It could also be the connector to the coolant level sensor in the expansion tank. Those fail more often than the sensor itself. I...
• Re: Bosch ECU connectors
  Historical mailing list - John
  Thu, 7 Oct 1999 19:09:32 -0400
  ...pay $193 from Baum Tools) a breakout > connector; that is to say, a combination male and female 25 pin connector > that I can use...
• Re: Bosch ECU connectors
  Historical mailing list - Darrell Boehler
  Thu, 7 Oct 1999 11:24:50 -0500
  ...Bosch ECU connectors > Greetings: > > I would like to fabricate (vs. pay $193 from Baum Tools) a breakout > connector; that is to say, a combination...
• trailer hitch electrical connection
  Historical mailing list - Kim Brennan
  Tue, 10 Dec 2002 14:49:00 -0500
  ...On my Tristar, it has a "factory" trailer hitch and electrical connector for the trailer. It's a really nice electrical connector. The only...
• Re: HIGH POWERED HEADLIGHT
  Historical mailing list - KIM BRENNAN
  Mon, 26 Jan 2015 13:52:58 -0500
  The connectors are designed for 55 Watts. Your use of non-road legal light bulbs is simply too much wattage for what the connectors...
• Quick, cheap and easy headlight relay
  Historical mailing list - Tim Hannink
  Sat, 15 Dec 2001 02:02:01 +0800
  ...I made a second small 18 gauge jumper with female .250" connectors on each end. One connector plugs into the multiple ground connector behind...
• Re: Fuel injector electrical terminal rubber grommet replacement
  Historical mailing list - George Goff
  Thu, 13 May 2004 08:02:59 EDT
  ...Looking into the open end of the connector you will see keyways in the connector body at each terminal into which you can insert...
• solderless connectors
  Historical mailing list - Troy
  Mon, 13 Jun 2011 22:02:38 -0800
  ...does anyone know of a source for the OEM connectors mentioned? Vintage connectors is a good source for metric and service is good. I...
• redoing ground connections on left cylinder head ('84 1.9L engine)
  Historical mailing list - John Lauterbach
  Wed, 4 Jan 2012 21:55:44 -0500
  ...Looks like remove bolts, clean/replace connectors as needed, and put things back together. I plan on soldering connectors to wires instead of relying...
• Re: Internal 115V power
  Historical mailing list - Mike Collum
  Thu, 27 Dec 2007 00:31:03 -0500
  Rob wrote: > Any thought to getting an outside electrical connector from a Westy and > putting it on your van? There are smaller weatherproof RV...
• Looking for black box white wiring connectors
  Historical mailing list - Laurence Smith
  Mon, 18 Apr 2005 14:07:37 -0400
  ...We are gathering up an inventory of the round white connectors that are inside the wiring black box in the engine compartment. We never...
• Re: Bosch ECU connectors
  Historical mailing list - David Marshall
  Thu, 7 Oct 1999 22:13:36 -0700
  Amp makes most of the VW connectors like this... this is about as far as I have gotten on this subject. If you call...
• Re: D15 connector revealed
  Historical mailing list - Alistair Bell
  Wed, 2 Nov 2011 14:04:00 -0700
  ...Pics and some text here >> >> http://shufti.wordpress.com/2011/11/02/vanagon-d15-connector-issue/ >> >> spoiler: the connector showed signs of overheating. >> >> alistair >
• Broken wiring connectors on an '84
  Historical mailing list - Pavneet Arora
  Mon, 7 Oct 1996 12:43:27 -0400
  Hello, I was poking around in the engine bay this weekend, and noticed a couple of broken wiring connectors that I hope I can...
• Re: Connectors for Fuel and Ignition wiring harness Digijet 83.5 - 85
  Historical mailing list - Mark Belanger
  Tue, 11 Mar 2003 17:22:15 -0800
  ...A lot of connectors come from places like Digikey or Molex. Alternately, you can use the Thomas Register to try and track down automobile...
• '81 Air cooled fuel injection control unit cable
  Historical mailing list - Michael S. Nichols
  Fri, 14 Jan 2000 09:08:50 -0500
  ...I need to replace connectors on my cable--thermo time switch and cold start valve ones have cracked--FLAPS said they are not available...
• multi prong connector removal tool
  Historical mailing list - Alistair Bell
  Sun, 28 Feb 2010 18:26:10 -0800
  Buoyed up by the hockey game today, I tried my hand at making a tool to remove the individual connectors from the multi prong...
• coolant level sensor
  Historical mailing list - Bill Davidson
  Fri, 18 Aug 2000 17:28:21 -0700
  ...unless the coolant follows the metal prongs up through the plastic to the connector part... Being that the contacts are wet inside the connector...
• Re: A/C Fan Blower Switch
  Historical mailing list - Scott DeSanti
  Tue, 30 Jun 1998 19:48:18 EDT
  ...I finally bypassed the 4-wide VW connector for the #2 circuit and installed another connector. The connector is approximately between the driver and...
• Re: Connectors for Fuel and Ignition wiring harness Digijet 83.5 - 85
  Historical mailing list - Zoran Mladen
  Wed, 12 Mar 2003 07:18:55 -0800
  ...They used to carry these connectors, haven't checked in quite a while. Z --- Mark Belanger <belanger@FLUID.COM> wrote: > Bergin, Richard wrote: > > I...
• Re: Cleaning corroded connectors
  Historical mailing list - Jeff Ensing
  Sun, 20 Apr 2003 07:53:35 EDT
  Make sure not to put your clean male connector into any corroded female connectors, better to cut the female off and get a new...
• parts wanted
  Historical mailing list - Marcus Burhanna
  Mon, 30 Jan 2006 08:43:17 -0500
  Hello All, I'm in need of a 86-91 Vanagon engine wiring harness connector it's a white round male connector also interested...
• Ground connector part number?
  Historical mailing list - jpbeauch
  Mon, 27 Jun 2005 11:49:27 -0400
  Hi all, Can anyone who have a copy of the ETKA can tell me what the part number for both ground connectors just above...
• Re: [WetWesties] Aux Battery Charging Alternatives Question for the Electrical Gurus
  Historical mailing list - Loren Busch
  Wed, 18 Jul 2007 10:30:12 -0700
  ...will all be changed to the small Anderson Powerpole connectors or the SAE offset connectors used often on solar panels, sometimes called Ford connectors...
• Re: Headlight improvements IMHO
  Historical mailing list - Bill Davidson
  Wed, 1 Nov 2000 09:21:13 -0800
  ...cleaned them up with contact cleaner, cut the old 9004 connector of and used crimp connector & soldered & sealed water tight with 'liquid electric tape...
• Need to repair/replace deteriorated instrument panel connector
  Historical mailing list - Jim Felder
  Sun, 13 Apr 2008 18:41:47 -0500
  ...The foil circuit is ruined at the long connector. I spent half the afternoon gluing a plastic replacement in place to go under the...
• Re: Cleaning corroded connectors
  Historical mailing list - Mike Collum
  Sat, 12 Apr 2003 23:39:42 -0400
  After rereading these posts concerning corroded connectors, I think some of us are looking at this animal from different ends. When I said my...
• mystery wire(s)
  Historical mailing list - Dan Barrett
  Tue, 23 Sep 2003 12:13:40 -0400
  ...From the other side of the connector, I've got two brown wires ending in one small brown plastic right-angle connector (similar to...
• Re: Mangled pins.
  Historical mailing list - Matt Roberds
  Tue, 19 Jun 2007 03:33:10 -0500
  ...I cut the connectors off of the harness with a few inches of wire on them. Then I laid the connector shells on the...
• clarification of O2 sensor splicing problem
  Historical mailing list - Mark McCulley
  Mon, 8 Jun 1998 19:36:30 -0700
  ...This is a fat green wire that leads to a male spade-lug type connector. This connector in turn connects to a female connector...
• Re: Wire connectors for relay blocks
  Historical mailing list - Dennis Haynes
  Mon, 9 May 2016 22:32:36 -0400
  ...Wire connectors for relay blocks I'm looking original type wire spade type connectors that crimp onto wires and then securely snap into VW...
• Re: Temp 2 sender connectors
  Historical mailing list - David Hally
  Wed, 2 May 2007 12:52:28 -0700
  Do a Google for "Bosch FI Connectors". I found a source for just the terminals, but they have them with wires, spare plugs, boots...
• Headlight Switch Replacement (Melted Connector)
  Historical mailing list - Wes Neuenschwander
  Tue, 8 Jun 2004 07:00:14 -0700
  ...The obvious solution is to cut the connector plug off the harness and make the connections with individual slip on connectors, crimp-connected (or...
• Re: trailer hitch electrical connection
  Historical mailing list - David Marshall
  Tue, 10 Dec 2002 11:54:33 -0800
  I've tried to get this connector locally - people still think I am weird. I am afraid it is a Europe only connector. David...