

| Subject: | Re: Help: Stuck accelerator pedal |
| From: | Per Lindgren |
| Date: | Sun, 30 Jan 2000 17:52:48 +0100 |
You could suffer from ice in the cable tube. This will give the symptom you mentioned. Try to warm it with a hairdryer. PerL 87 Syncro 112i Dick Taylor wrote: > Help. 1987 syncro. My accelerator pedal is stuck in the full-on position. I > can pull (hard) on the cable in the engine compartment and get it back to > its normal position, but when I press down on the pedal again, it goes down > and stays there. Obviously there is some problem with the cable somewhere > along its run. Temperature here is 10 degrees F. Bus drove fine and was > parked outdoors for 3 hours before the problem happened. > > Is this a symptom of a dying cable, which is maybe frayed at some point? > Will I be able to spot the problem area if I crawl under the bus with a > flashlight in my hand? This is my first winter with this bus, so I don't > know if this is maybe a cold-weather thing. > > All advice and assistance gratefully accepted. > > Dick Taylor > hetchins@montana.com
Have something to add on this topic today? Revive this thread in the forum »