Ken, when I had to redo things last year, the only tubing I could get my
hands on is marked 13 mm (1/2 inch) heater hose.  This is going from the
cold start valve to some other connections leading to the inlet manifold.
What I need is honest to goodness high vacuum tubing.

John Lauterbach
----- Original Message -----
From: <KENWILFY@AOL.COM>
To: <vanagon@GERRY.VANAGON.COM>
Sent: Monday, January 31, 2000 9:09 AM
Subject: Re: Vacuum line P/N's

> The best way to deal with the vacuum line issue is to measure the inside
> diameter of the hose with a ruler in milimeters.  Give me the numbers that
> you need and I can get the hose for you.  I would check this for you
myself
> but I don't have any 1.9l motors here right now.
>
> Thanks,
> Ken Wilford
> http://www.vanagain.com
> John 3:16
> Office (856)-765-1583
> Shop (856)-327-0027
> Fax   (856)-327-2242