Sean,

Take that greasy case down to the machine shop too and have him boil it
out and make sure the oil passages are clean.  Have him rebuild the rods
too, not just balance them.

If you buy your parts from Boston Bob he will advise you on the rebuild,
and you can't beat having an expert on call.
http://www.bostonengines.com

You don't want to skimp so it will be in fine running condition for your
son--good luck and have fun!

Sean Garrett wrote:
>
Rotate and scrape. Another bolt!
> Remove it and look again for more bolts. Another one I missed. There is so
> much caked on grease that identifying bolts from crud is difficult.

I can now finally get my cam, crank, and rods down to
> the machine shop for inspection and balancing.
> ______________________________________________________
> Get Your Private, Free Email at http://www.hotmail.com

--
Stuart MacMillan
Manager, Case Program
800-909-8244 ext. 8208

Getting your share of the Net yet?
http://cobaltgroup.com
http://UsedEquipNet.com