

| Subject: | Re: oil pump removal |
| From: | Sean Garrett |
| Date: | Tue, 15 Feb 2000 11:09:39 MST |
I am doing a total rebuild, So Ill try to remove some front case bolts, a little light tapping, and follow up with prying. If this does not work can I just split the case and remove it from whatever side it sticks too? Sean >From: "Tom Young" <tomyoung1@home.com> >To: "Sean Garrett" <seangar@HOTMAIL.COM> >CC: <vanagon@GERRY.VANAGON.COM> >Subject: Re: >Date: Tue, 15 Feb 2000 09:34:13 -0800 > >The oil pump's a real tight interference fit and sure as heck SHOULDN'T be >tacked in there with Permatex, except for a small amount on the paper >gasket. If you're doing a complete rebuild of the engine, including >splitting the case, then make sure the surrounding "through" >bolts/studs/nuts are removed, or even wait to remove the pump until you've >basically got the case split. If you are just trying to get the pump out >without splitting the case, then the "pry" method will work, but you've got >to be patient. Because the pump is such a tight fit, don't expect to see a >big movement of the pump as you pry each side. I removed a couple of pumps >from engines I was rebuilding last year and, as I recall, it probably took >7-10 minutes to remove each pump; I'd pry on one side, pry on the other, >back and forth, back and forth, and slowly, slowly, the pump moved out. >It's hard to tell you in words how much pressure to use. I was using a >small pry bar, maybe 9"-10" long, and I'd guess I was putting around 10 >lbs. >of pressure on the pry bar. Use moderate pressure and work back and forth >for a minute or two; if nothing's happening, use a little more pressure. > >From: "Sean Garrett" <seangar@HOTMAIL.COM> >To: <vanagon@GERRY.VANAGON.COM> >Sent: Tuesday, February 15, 2000 8:52 AM > > > > I tried to remove my oil pump and was unsuccessful. After removing all 4 > > bolts I pried lightly on the 2 opposing tabs that stick out. It seems >that > > its really tacked on there good (with some permatex I bet). How mush > > pressure should I put it under and are there any other methods I could >use? >--------------------------------------------------------------------------- >Tom Young tomyoung1@home.com >Lafayette, CA 94549 '81 Vanagon >--------------------------------------------------------------------------- > > ______________________________________________________ Get Your Private, Free Email at http://www.hotmail.com
Have something to add on this topic today? Revive this thread in the forum »