I am in the process of installing a remanufactured engine into my 1982
Westy (air cooled 2 liter).  I lost my notes on where the vacume lines
go to the following:
The two vacume inlets on intake air distributer and on the throttle
valve housing and the connections on the fuel pressure
regulator,deceleration valve, and the vacume advance on the ignition
distributor.  I have a "T" in the line coming off the intake air
distributor but don't remember where to go from there (pressure
regulator, deceleration valve, or distributor).  I also don't know what
device connects to the vacume inlet on the throttle valve.  The Bently
manual does not show a routing diagram for the air cooled but does for
the waterboxers.  Anybody have this info?  Thanks.

Dave Seasholtz