Yep, it does work.  BTDT

Karl Wolz

----- Original Message -----
From: <KENWILFY@AOL.COM>
To: <vanagon@GERRY.VANAGON.COM>
Sent: Monday, February 21, 2000 7:34 AM
Subject: Re: Front Heater Valve Replacement

> How about using two small wood clamps with a couple of pieces of wood each
to
> clamp the hoses coming into and going out of the valve.  Then when you
remove
> it you will lose a minimal amount of coolant and probably will not need to
> rebleed (I leave this up to you).  I have never tried this, but it would
work
> as long as you have enough space to get the clamps on the hoses.
> Hope this helps.
>
> Ken Wilford
> http://www.vanagain.com
> John 3:16
> Office (856)-765-1583
> Shop (856)-327-0027
> Fax   (856)-327-2242