I see this type of post every Spring (what at PITA it is getting the fridge
in and out for service).  I have had mine in and out several times, and it
is literally a 15 minute job - it always lines up perfectly, and drops right
into place.  Am I just that skilled/lucky, or is it something having to do
with the model year?  ('89)

Just curious...

Brent Christensen
'89 GL Syncro Westy
Santa Barbara, CA

----- Original Message -----
From: Christine Murdock <chrismur@MICHIANA.ORG>
To: <vanagon@GERRY.VANAGON.COM>
Sent: Saturday, February 26, 2000 12:18 PM
Subject: Reinstall refrigerator( or dance the Hokey Pokey)

> Adding to other's posts: 1. Bend tubes to clear bottom of stove. 2.
> Using 2-3'-2x4's and 2-1x2's total 2-1/2" each set as risers off floor,
> slide refrig onto side rails 'till tubes hit back.  3.  Hook up ground
> wire on top center.  110v & 12v wires are clear to back right?  4.
> Through side grill opening pry tubes up with a short 2x2 to exit hole in
> exterior; while, lifting with your knee in the refrig push it in to the
> marks with your right arm.5.  locate screw holes with an ice pick &
> hookup 110v, gas, and 12v. 6.  Install vent cover.  Rawson Murdock '86
> Westy