No, you don't need to remove this nut to do the breaks.  It just makes
the quarters a little tighter with the flange on, but still easily
doable.  If you ever do need to get this nut off to repack or replace
your wheel bearings

> BRENT CHRISTENSEN wrote:
>
> I am going to try and tackle a complete front end brake and bushing
> job this weekend.  In addition, I need to replace the rear shoes and
> have the drums turned if time permits.
>
> In looking at the Bentley, it appears that the BIG nut on the end of
> the rear spindle has to come off in order to remove the drum and get
> to the brakes.  Is this correct?  If so, what size socket does this
> take, and will I need a 6' long breaker bar to get it off?  :-)
>
> Brent Christensen
> '89 GL Syncro Westy
> Santa Barbara, CA
I strongly recommend renting a 3/4 drive electric impact wrench and
socket, you will be glad you did!
--
Stuart MacMillan
Manager, Case Program
800-909-8244 ext. 8208

Getting your share of the Net yet?
http://cobaltgroup.com
http://UsedEquipNet.com