

| Subject: | Re: 4 newbie questions... |
| From: | Brent Christensen |
| Date: | Sat, 11 Mar 2000 14:38:43 -0800 |
>2) For the life of me, I cannot figure out how to rotate the >"captains chairs", I've seen it done once before, but I can't seem >to make it work. Push the little dohickey in front *down* while rotating the chair. If it won't budge, then you need to pull it apart and clean/grease the swivel. If it will turn, but you can't clear the door, steering wheel, etc. Try sliding the seat first, then opening up the door. Fo my driving position, I need to slide the seat forward about 2 notches, then open the door, tilt the seat back forward, and then it spins around with no problem. >4) How difficult is it to replace or re-attach the gasket/seal on >the pop-top? Mine is coming away in various places. If any one has >any suggestions or advice for doing this I would appreciate it. Never done it myself, but I understand it can be a bit tricky. Check the archives for information about adhesives and techniques. The PO of my Westy got the rubber from Bus Depot, and it is holding up really well and looks very good. Welcome to the club! Brent Christensen '89 GL Syncro Westy "Klaus" Santa Barbara, CA -----Original Message----- From: Vanagon Mailing List [mailto:vanagon@GERRY.VANAGON.COM]On Behalf Of Jeff Johnston Sent: Saturday, March 11, 2000 12:44 PM To: vanagon@GERRY.VANAGON.COM Subject: 4 newbie questions... I just bought an '87 Westfalia. I've been lurking on this site since list before I bought the vanagon and have found it really insightful, but lacking an owner's manual, I am having difficulty finding answers to a few embarrassingly simple questions and would really appreciate it if someone could help me out. 1) How do I refill the windshield wiper fluid? I can't locate the fluid reservoir. 3) Can someone recommend a good parts supplier to get a plate cover for the fuse box (hopefully with the correct fuse diagram on the inside for this make & model)? 4) How difficult is it to replace or re-attach the gasket/seal on the pop-top? Mine is coming away in various places. If any one has any suggestions or advice for doing this I would appreciate it. Thanks! -Jeff '87 Westy
Have something to add on this topic today? Revive this thread in the forum »