

| Subject: | Re: Problem Solved! was: Van Dies, Relays clicking... |
| From: | Mark Upton |
| Date: | Thu, 16 Mar 2000 17:27:44 -0500 |
As Andy Rooney would say Don't just hate those ECUsWhy do ECUs always break?Why do ECUs cost so much? Nobody likes to have to replace ECUs Why do they call them ECUs anyway? KENWILFY@AOL.COM wrote: > I found the problem today. I installed two new relays that I had to rule > this out. Then I took a new ignition switch with me and tried to take a trip > to town. The van died when I backed into the street (pretty low traffic > around here so not a problem). I tried to restart and it was acting the same > with relays clicking, etc. I removed the lower cover on the steering column > and tried the new ignition switch, turning it with a screw driver. Van still > wouldn't start. > > So I decided to install my digitool equiped ECU ala Darrell to see if I could > figure anything out this way. After installing my known good ECU the problem > totally disappeared (along with some weird idling problems that the van was > having). I drove the van enough today to be sure that the ECU must have been > the trouble. > Thanks for all of those who gave advice and opinions. > Rico hit it right on the money, but this was one of those gremlins that could > have driven you crazy if you didn't have a good ECU to swap in. > The List is great! > > Thanks, > Ken Wilford > http://www.vanagain.com > John 3:16 > Phone: (856)-765-1583 > Shop: (856)-327-0027 > Fax: (856)-327-2242
Have something to add on this topic today? Revive this thread in the forum »