RE: '90 Vanagon Jump Seats and Rear Bench/Bed
Left side means the left side of the right seat.  All of my part numbers are
for a single jumpseat installed behind the passenger front seat on US model
Vanagons.

Mike Snow
  -----Original Message-----
  From: Buettner, Peter [mailto:PGB@dolby.com]
  Sent: Thursday, March 23, 2000 8:39 AM
  To: 'Michael Snow'; vanagon@GERRY.VANAGON.COM
  Subject: RE: '90 Vanagon Jump Seats and Rear Bench/Bed

  Michael,

  Thanks for the info.  The part numbers *401 and *402 are still available
($4.32 and $13.42 respectively).  I'm not sure about *401A.  I got a *402
but couldn't see where it fits so I returned it.  *401 mounts inside the
battery box.  I didn't use a reinforcement plate inside the wheel well.
None of the VW plates fit there.  I have not received *225, but if it's for
the left side (you mean left seat, right?) then I won't need it anyway.
There are 4 thick washers (#311-199-125@$1.32 each) that go between the bar
and the battery box.  You could also stack 3 or 4 regular washers.

  Cheers,
  Peter

  -----Original Message-----
  From: Michael Snow [mailto:mwsnow@HOME.COM]
  Sent: Wednesday, March 22, 2000 5:55 PM
  To: vanagon@GERRY.VANAGON.COM
  Subject: Re: '90 Vanagon Jump Seats and Rear Bench/Bed

  I copied the following part numbers from the dealer microfiche:

  255 887 225C - above floor mounting plate, both sides, 2 required, $13.92
  ea.
  255 887 225  - below floor mounting plate, left side, $15.46
  255 887 225A - below floor mounting plate, right side, 13.92
  253 887 465  - plastic cap for seat leg "dowels", 2 required, $2.20 ea.
  255 887 401A - upper reinforcement, left side, OBSOLETE
  255 887 401  - upper reinforcement, right side, OBSOLETE
  255 887 402  - upper reinforcement, right side, $??? PROBABLY OBSOLETE

  Unfortunately, my notes fail me from here on.  There is a bracket on the
  left upper mount that I didn't get the number for.  It is #27 on fiche.
  Also some large washers (possibly plastic) #29 on fiche.  401, 401A, 402,
  and the mysterious #27 are simple pieces of angle iron that could be
  fabricated by anyone with common hand tools.  All part numbers and prices
  were obtained at a Southern California VOW dealer.  All of the lefts and
  rights apply to the parts as you look forward at the rear of the passenger
  (right side) front seat.

  In a previous post, I stated that the above floor mounting plates were
flat
  steel with a hole in the center.  This is probably wrong.  My notes show a
  short "pipe" protruding from the face of both above and below floor
plates.
  Someone with a factory installed seat may be able to verify how the plates
  fit together.  My plan was to call someone I know locally with a Carat and
  have another look prior to installation.

  I hope that this doesn't ADD to the confusion.

  Mike Snow
  Camp Pendleton, California
  1982 Westfalia 1.6TD
  1983 ASIA 1.6D

  Hi Michael,
  Do you have part numbers for the bottom brackets?  I went to the dealer
and
  ordered all the brackets the parts guy had on his microfiche.  But they
  don't fit into each other.  I basically got two kinds of brackets.  One
has
  a short round cup welded on a plate, the other one has a longer oval
shaped
  cup on a steel plate.
  I got the following part number:
  255-887-225-C oval shape
  225-887-225-A round shape
  Can you make sense out of this?
  Thanks,
  Peter

[text/html]