Your camber is way out of adjustment.  The upper control arm bolt has
eccentric washers that allow for adjusting the camber.  You are best off
taking it to a competent frame and wheel shop for a complete alignment,
you can't do this correctly at home.  Leave your torch out of this one!

"Hans V." wrote:
>
> I have a situation with my front passenger side wheel , the top of the wheel
> leans inward five degrees the van rides straight and true with no apparent
> shimmy or vibration at all speeds.the problem is it eventually wears the
> inside corner of the tire out. now i have replaced upper and lower ball
> joints,wheel bearings ,shocks and cant figure it out. the control arm
> bushings and steering linkage check outfine !! IT NEEDS A SERIOUS TOE IN ,
> MAYBE THE MAIN COIL SPRING IS SACKED OUT!!? I SEE NOTHING THAT CAN BE
> ADUSTED BUT I AM OPEN TO ANY HELP !! IT IS A  84 VAN WITH 157,000 MILES ON
> IT. SO AGAIN ANY HELP, BEFORE I GET OUT MY TORCH AND START HEATING UP
> SOMETHONG INTERESTING.
>
>                         THANKS HANS.
>
> ______________________________________________________
> Get Your Private, Free Email at http://www.hotmail.com

--
Stuart MacMillan
Manager, Case Program
800-909-8244 ext. 8208
Fax: 206-269-6360

Getting your share of the Net yet?
http://cobaltgroup.com
http://UsedEquipNet.com