If yours is anything like mine was you are going to have to sand anyway
if you use the JB Weld for the pitts. Just use a fairly large GOOD hard and
flat sanding block and you will be ok.
    If God is smiling on you and you have no pitts the gunk from the old
gasket can be easily removed with Carb Cleaner and a wire brush.

-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com]On Behalf
Of Jason Willenbrock
Sent: Tuesday, March 21, 2000 9:09 PM
To: vanagon@GERRY.VANAGON.COM
Subject: head gaskets

hey all,
when sealing head gaskets. is it okay to take fine sand paper to the sealing
surface to remove the adhesive from the last gaskets and smooth the surface.
or is there a better way to remove that gum and gasket remainders? my
concern is that i don't want to uneven the sealing surface any and result in
another leak down the road (no pun intended). am i paranoid or what?
thanks
jason
______________________________________________________
Get Your Private, Free Email at http://www.hotmail.com