Oops! forgot to copy the list...
----------
From: Jeff Taberski <jeff@taberski.com>
Date: Sat, 08 Apr 2000 15:08:03 -0500
To: Gina <GG811@SENTRYMICRO.COM>
Subject: Re: No stalling @ idle/low rpms

on 4/8/00 14:59, Gina at GG811@SENTRYMICRO.COM wrote:
**snip**
> Check the angled connecting boot (appx 3'' diameter) between the AFM and
> throttle body.  It's easy
> enough to get off - attaches with 2 clips.  Take it off, flex it and
> inspect it thoroughly for cracks of any kind, big or small.  If you find
> any, seal them up (i used silicone) and allow it to cure thoroughly
                     ^^^^^^^^^^^^^^^^
I was always told to NEVER use silicon on the air handling side of an engine
with an O2 sensor.  I understand it poisons the sensor.  Am I wrong?

-Jeff