

| Subject: | Re: Gray Water Tank |
| From: | BRENT CHRISTENSEN |
| Date: | Fri, 14 Apr 2000 11:20:49 -0700 |
I think there are a lot of people who prefer to use purified water - that's why they fill from inside. (In Mexico, for example). I've been contemplating a filler like you describe (actually since you described it over a year ago, I think), but it is rare that I fill up at a hose bib. I usually bring a 3 gallon poly water jug and fill up at those "Glacier" coin op water vending machines if I can park right next to one. When in Mexico, I do the same thing, but there you buy from an actual shop. Just my $0.02 Brent Christensen '89 GL Syncro Westy Santa Barbara, CA > -----Original Message----- > From: Vanagon Mailing List [mailto:vanagon@GERRY.VANAGON.COM]On Behalf > Of Davidson > Sent: Friday, April 14, 2000 10:22 AM > To: vanagon@GERRY.VANAGON.COM > Subject: Re: Gray Water Tank > > > >If I fill mine from the top (by far the easiest way to fill > from gallon > jugs), I can get around 13 gallons in, but then it spills out > the exterior > filler on cornering. I don't think I could get that much in from the > outside. I usually stop at around 10 gallons, to avoid > washing the left > side of the van as I drive! (yes, I am missing the locking cap for the > filler) > > Have you actually measured 13 gallons?... I measured about 10 > filled to the > top.... > > Also, make youself a filler nozel and you will never want to > fill through > the top again... takes about two minutes to fill the tank... > all the way to > the top and no spilling... > > Just go the hard ware store and get a 10 inch piece of tubing > that will fit > through the rubber baffle at the filler tube... then select a > combinating of > fittings to reduce from 3/4" hose to the tubing that you > bought. That's > it... getting the water to enter past the rubber baffle makes all the > difference... you can add an on off valve if you like for > added convenience. > > Bill > > > >Bill > > > [text/html]
Have something to add on this topic today? Revive this thread in the forum »