I am in the process of replacing the tranny in my new Westy. I have three
problems I hoped to address while replacing the tranny.
1.) A noisy transmission(loud whine)
2.) Pops out of first and second gear.
3.) The van shudders when starting out in first gear.

I hope the new tranny will address the noise and popping out of gear. As for
the shuddering, I initially suspected that the motor mounts might be bad or
that the clutch or pilot bearing might be shot.

The motor mounts look OK and don't appear to be torn. The rubber on the
tranny mount, on the other hand, is torn/seperated from the outer ring. Upon
removal of the tranny I found what appears to be a new sachs clutch and
pressure plate. The pilot bearing looks OK to me. The flywheel is a bit
discolored toward the center area where the clutch contacts it but looks OK
on the outer area. The inner area has brown and blueish splotches which I
suspect indicates overheating.

My questions are:
1. Could the torn tranny mount cause the shuddering?
2. Could one of the tranny problems be causing the shuddering?
2. What does the flywheel discoloration indicate?
3. Am I overlooking something else that could cause this problem?

Any input on this problem would be greatly appreciated.

Gary

Gary McEachern, Reading Ma.
'90 Westy
'84GL w/ Super Sunroof (for sale)
'87GL Wolfsburg Weekender (for sale)
'75 Spitfire

______________________________________________________
Get Your Private, Free Email at http://www.hotmail.com