John;
        It seems to me the engine heat would re-melt the glue, exposing
the wires again. I recommend the old standby; JBWeld. Worked for me.

Drive Safely & Good Luck
Ken Lewis    <Kernersville,NC>
86 VW crewcab;60 356B Coupe
--------------------------------------------------

On Mon, 24 Apr 2000 16:35:19 -0700 John Andersen <tincat@RELAYPOINT.NET>
writes:
>    A couple of weeks ago someone posted about a
>problem with the plastic breaking on their
>distributor and exposing the wires from their hall
>sender.
>      I would like to add one more hint about
>sealing the wires, use a low temp hot melt glue
>gun.  My wife just bought one and the thing is
>great, it gets hot enough to melt the glue but the
>glue will not melt styrofoam board, so the temp
>shouldn't bother wires or the electronics inside
>the distributor, feel free to correct me if I am
>wrong.
>     It still gets too hot for you to touch the
>end, you WILL get a nasty burn but this might be
>something to keep in mind for all future projects.
>
>    John

________________________________________________________________
YOU'RE PAYING TOO MUCH FOR THE INTERNET!
Juno now offers FREE Internet Access!
Try it today - there's no risk!  For your FREE software, visit:
http://dl.www.juno.com/get/tagj.