Hi,
Here are the values.  Stage 1, 10Nm(7 ft lb),              Tightening
Sequence     7         1           3          5
                                     Stage 2,  40 Nm(30 ft lb),
6         4           2          8
                                     Stage 3, 50 Nm(37 ft lb)
                                      Check final 50 Nm(37 ft lb)

This is direct from the Bently.  Sequence is looking at the head.  Rocker
arms are torqued to 25 Mn (18 ft lb).
Good luck,

John Andrew, 1980 and 1984 Westys

-----Original Message-----
From: kenneth d lewis <kdlewis@JUNO.COM>
To: vanagon@GERRY.VANAGON.COM <vanagon@GERRY.VANAGON.COM>
Date: Saturday, April 22, 2000 8:37 AM
Subject: Head torque values...

>Greetings;
>        The heads are on,the glue is wet, the Bentley is seventy miles
>away. Can someone look up the torque values for a 85 gas WBX,please.
>
>Drive Safely & Good Luck
>Ken Lewis    <Kernersville,NC>
>86 VW crewcab;60 356B Coupe
>--------------------------------------------------
>
>________________________________________________________________
>YOU'RE PAYING TOO MUCH FOR THE INTERNET!
>Juno now offers FREE Internet Access!
>Try it today - there's no risk!  For your FREE software, visit:
>http://dl.www.juno.com/get/tagj.