Skip to main content
Gerry | Vanagon
Checking account...
← vanagon.com home · Continue the discussion in the forum
Subject:Re: Doing a 1.9l to 2.1l swap
From:Stuart MacMillan
Date:Thu, 4 May 2000 08:24:40 -0700
Ken,

I ran into the same problem and I used the larger throttle body with the
single switch.  I cut the plug off the old harness from the 2.1 and cut
the four spade connectors off the harness in the 1.9 and spliced in the
2.1 plug.  Works fine, just be sure to check the adjustment of the
switch, mine was way out, and it is much easier to do on the bench!

--
Stuart MacMillan
Manager, Case Program
800-909-8244 ext. 8208
Fax: 206-269-6360

Getting your share of the Net yet?
http://cobaltgroup.com
http://UsedEquipNet.com