Easier to do with a digitool than by ear, too!

Karl Wolz

----- Original Message -----
From: "Stuart MacMillan" <stuart@COBALTGROUP.COM>
To: <vanagon@GERRY.VANAGON.COM>
Sent: Thursday, May 04, 2000 8:24 AM
Subject: Re: Doing a 1.9l to 2.1l swap

> Ken,
>
> I ran into the same problem and I used the larger throttle body with the
> single switch.  I cut the plug off the old harness from the 2.1 and cut
> the four spade connectors off the harness in the 1.9 and spliced in the
> 2.1 plug.  Works fine, just be sure to check the adjustment of the
> switch, mine was way out, and it is much easier to do on the bench!
>
>
> --
> Stuart MacMillan
> Manager, Case Program
> 800-909-8244 ext. 8208
> Fax: 206-269-6360
>
> Getting your share of the Net yet?
> http://cobaltgroup.com
> http://UsedEquipNet.com