One is yellow. The other is white.

Interestingly, my propane guy (and I seem to recall the instructions to my
regulator confirmed) that teflon tape isn't needed/isn't good for propane
fittings. I' don't know anything more about it...

G. Matthew Bulley
Bulley-Hewlett
Corporate Communications Counselors
www.bulley-hewlett.com
Mount Olive, NC USA
877.658.1278 tollfree

"I, the undersigned, shall forfeit all rights, privileges, and licenses
herein and herein contained, et cetera, et cetera . . . fax mentis
incendium gloria culpum, et cetera, et cetera . . . memo bis punitor
delicatum!" It's all there, black and white, clear as crystal!      -Wonka

-----Original Message-----
From:   Michael J. Sullivan [SMTP:sullivan@OPENMARKET.COM]
Sent:   Friday, May 05, 2000 8:23 AM
To:     vanagon@GERRY.VANAGON.COM
Subject:        Re: Propane Leak solved

Do please tell us the difference!

Cheers,
MJS

At 08:33 PM 5/4/00 -0700, Bill wrote:
>>>>
Don't forget that for gas you have to use the YELLOW teflon tape, not the
white.  Many store clerks don't know this, so be careful.  It is not the
same thing and does matter.

 ----- Original Message -----
 From: <mailto:rileyk@HOME.COM>Riley Kettner
 Also use some teflon tape. The Clerk was nice enough to
 give me a one foot piece, which saved me from buying a whole role.

<<<<

Michael J. Sullivan
Marshfield Hills, MA
Central America 2001 or bust!

'87 VW Vanagon GL Syncro Westfalia "Sunny" (soon to be TDi-powered)
'86 VW Syncro Doublecab "Claude"
'96 VW Passat TDi "Teddi" (46mpg)

*********************************************
work:       http://www.openmarket.com
my vanagon: http://www.hsdesign.com/vanagon
scan tips:  http://www.hsdesign.com/scanning
*********************************************