None of my fittings have Teflon, neither from the factory, nor from the guy
at Suburban Propane (who installed the tank after sandblast/recoat). Around
the main fittings to the tank, there is some putty goo. That's the only
place.

G. Matthew Bulley
Bulley-Hewlett
Corporate Communications Counselors
www.bulley-hewlett.com
Mount Olive, NC USA
877.658.1278 tollfree

"I, the undersigned, shall forfeit all rights, privileges, and licenses
herein and herein contained, et cetera, et cetera . . . fax mentis
incendium gloria culpum, et cetera, et cetera . . . memo bis punitor
delicatum!" It's all there, black and white, clear as crystal!      -Wonka

-----Original Message-----
From:   David Beierl [SMTP:dbeierl@IBM.NET]
Sent:   Friday, May 05, 2000 4:14 PM
To:     vanagon@GERRY.VANAGON.COM
Subject:        Re: Teflon tape difference: Propane Leak solved

At 13:52 5/5/2000, Steve Lashley wrote:
>All propane fittings should be compression fittings and don't require the
>tape.

Uh...what about where the POL spud screws into the regulator?  And other
similar fittings...

david
David Beierl - Providence, RI
  http://pws.prserv.net/synergy/Vanagon/
'84 Westy "Dutiful Passage"
'85 GL "Poor Relation"