At 07:29 5/10/2000, John Zebatto wrote:
>and front part of the cab when operating.  I have a 90 Wesfalia.  I checked
>my Bentley's but  thought I could move the arm up a little bit just by just
>loosening the external screw rather than go through the glove compartment.
>But that did not work and now that screw does not move at all.  Do I just go

You have to remove the external bolt, lift the arm off the drive shaft,
then put it back down where you want it and replace the bolt.  There is no
internal adjustment.  However, it is very likely that the splines in the
socket of the arm have stripped.  See archives for the last two weeks or so
for extensive discussion of this whole subject.

david

David Beierl - Providence, RI
  http://pws.prserv.net/synergy/Vanagon/
'84 Westy "Dutiful Passage"
'85 GL "Poor Relation"