Thank you for posting the link. I have the link to winimage on my page
as well.

People who are running NT, ( h2oboxer is running nt ), really need to
reread my page again. I posted what you needed to do when I made the
page.

I'll quote my page:

> On NT machines, you must install it, then go to the cd and into the
>  'EPC_PROG.W95' directory, and copy
>
> LEXHDL5.DLL
>
> LEXHDLL5.DLL
>
> to your ' epc_prog' directory that is installed on your computer.

That is why you are getting the hardlock missing error.

On Thu, 18 May 2000 21:29:42 -0400
h2oboxer <h2oboxer@OPTONLINE.NET> wrote:

> Marc,
>
> I have been able to successfully extract all the files and install the app onto my
> machine. You need to get Winimage.
>
> http://ourworld.compuserve.com/homepages/gvollant/winimage.htm
>
> After you install winimage you need to extract ALL the file from the .iso file.
> into a temporary directory.
>
> 1. Start Winimage and open the .iso file.
> 2. Select *.*
> 3. Click extract (specify the directory to extract to)
> 4. Use Extract with path name and click OK.
> 5. Wait.
> 6. Wait some more (there are a lot of files)
> 7. After it is done exit winimage and go to the directory that you extracted the
> files to.
> 8. You can install the app right from here if you want by running ecmsetup.
> 9. It takes about 20 min to install.
> 10. Once the install is done , run the app.
> 11. I am getting a message about Hardlock missing(I'm not sure what to do next)
>
> Any help would be appreciated.
>
> Hope this helps you.
>
> >

--
============================================================---------
Dominique Cormann                Email: dcormann@kozmik.guelph.on.ca
Homepage: http://kozmik.guelph.on.ca
Diesel page: http://kozmik.guelph.on.ca/gtdproject