Steven,
On my 90 Westy there are two fuses on the post behind the driver's seat. One
protects the fridge and the other protects the pump/LED circuit. (I think I
remember these fuses may be located in the box under the driver's seat on
some earlier models.) If the pump/LED fuse were blown neither would work...
though the cabin light would because it is not on the same circuit as the
fridge or the pump/LED circuits. One other, more ominous, possibility is
that the spark you mention blew the LED circuit board (expensive). That
happened to me and I have since learned to disconnect the battery or pull a
fuse BEFORE working on electrical circuits anywhere in the van.
Good Luck,
Bill
----- Original Message -----
From: "seheller" <seheller@SYMPATICO.CA>
To: <vanagon@GERRY.VANAGON.COM>
Sent: Sunday, May 28, 2000 7:34 AM
Subject: Fuse for LED's?

> Aftermarket water pump in Westy (82) sink stopped working when the
> (aftermarket) switch sparked upon removal.  I'm pretty sure it must be a
> blown fuse, but the in-line fuse to the pump is OK.  No fuses on the main
> panel appear (visually) to be blown.
>
> All other 12V accessories are still working, EXCEPT the LED's which show
> the fridge function, water tank levels, and battery condition.
>
> Anyone know where is the fuse that controls these LED's?  If there is an
> in-line fuse, it seems I can't get at the wiring without a complete sink
> and/or countertop removal!
>
>
> Thanks
> -
> Steven Heller
> Toronto, Canada
>