Yosh;

You have two oil pressure sensing switches.
The low pressure switch (4.4) must open between 2.2 and 6.5 psi.
It is located between cylinder 3 and 4.
The other switch (13.1) must close between 10.9 and 14.8 psi.
It is in the vicinity of the oil pump.
The flashing LED is associated with the 4.4 sensor.
The flashing LED and the buzzer occur with RPM>2000 and no switch closure
from the 13.1 sensor.
A loose connector in the engine compartment gave me the LED/Buzzer
symptom .

Drive Safely & Good Luck
Ken Lewis    <Kernersville,NC>
86 VW crewcab;60 356B Coupe
--------------------------------------------------

On Thu, 8 Jun 2000 18:15:48 +0900 Yoshi <dolphin@MARS.NETSPACE.OR.JP>
writes:
>Hello..
>
>Does anyone know the position of oil pressure switch?
>Where is it attached?
>
>Thanks
>
>Yosh@87Westy
>dolphin@mars.netspace.or.jp

________________________________________________________________
YOU'RE PAYING TOO MUCH FOR THE INTERNET!
Juno now offers FREE Internet Access!
Try it today - there's no risk!  For your FREE software, visit:
http://dl.www.juno.com/get/tagj.