In a message dated 6/20/00 2:32:04 PM Eastern Daylight Time,
LISTSERV@GERRY.VANAGON.COM writes:

<<  Re: Seeking comments on Muffler Replacement >>
    OK you guys stop the bickering and get the <A
HREF="http://members.aol.com/Fkc43/stebro.htm">STEBRO/Vanagon Stainless Steel
Muffler.</A>  It does not need any brackets, it has its own.  It does not
need a tail pipe, it has its own.  No need to fool around with trying to
figure out which end and how the tailpipe goes on.  One less gasketed
connection it the exhaust system, too.  The muffler pops into place in a few
minutes and lines up exactly with the existing bolt holes in the cast muffler
bracket carrier.  Pop in the four stainless steel bolts that are supplied,
put on the stainless steel flat washers, lock washers and nuts, put the
doughnut gasket between the muffler inlet pipe and the CAT, pop in the three
stainless steel bolts (supplied) in the muffler to CAT flanges, and tighten
up the seven bolts and your done.  One half hour max !  Guaranteed for life.
Guarantee transferable !  AND, as a side benefit will lead to less time spent
fooling around with your exhaust system and less postings about muffler
replacement on the List !

Cheers

Frank Condelli
'87 Westy & Lionel Trains
Vanagon/Vanagon Westfailia Service for the Ottawa Valley
STEBRO/Vanagon Stainless Steel Exhaust Systems
Almonte, On
Visit me on the web.......> <A
HREF="http://members.aol.com/Fkc43/busindex.html">Frank Condelli & Associates<
/A>  or
http://http://onward.to/frankcondelli
Want to win $10,000? Click to enter!!
 <A HREF="http://irecommend-it.com/sh.e?22EC343C3B75">iRecommend-It Public
Page for RAlanen@aol.com</A>