For longest life use something with out ammonia.. it is not good for vinyl

Bob Adams
Sign shop owner

----- Original Message -----
From: "Terry Kay" <CTONLINE@webtv.net>
To: <vanagon@GERRY.VANAGON.COM>
Sent: Thursday, July 27, 2000 12:10 PM
Subject: Suggested amendment to sticker installation instructions

> To all sticker receiving Vanagonites;
> Let me make this suggestion to ease the installation.
> After you clean your window good, with Windex, spray a fine mist on the
> glass where the sticker is going to go, then lay the sticker, with the
> backing paper, on the glass.
> The fine mist will allow you to slide the sticker around a little, in
> the event you have placed it on the glass crooked.
> After you are satisfied with it position, take a plastic squeegee, (
> Bondo applicator will work ) and work out the air bubbles, starting from
> the inside and work them to the outside edge of the sticker.
> Let it sit for about 5 minutes and pull the paper backing off.
> Your done, and the sticker is straight, and your happy!
>
> Good Luck,
>
> Terry