Greetings and Salutations;
        I thought I would share (again) a quick check method I
discovered.  It must be done after the vehicle has set overnight.
        From the ECU's connector hold one of your VOM's leads on pin six.
Alternately compare readings between pins nine and ten with the other
lead.*  Theoretically if both sensors are at the same temperature then
their resistances should be equal.

Drive Safely & Good Luck
Ken Lewis    <Kernersville,NC>
86 VW crewcab;60 356B Coupe
--------------------------------------------------
*DIGIFANT wiring harness only.

________________________________________________________________
YOU'RE PAYING TOO MUCH FOR THE INTERNET!
Juno now offers FREE Internet Access!
Try it today - there's no risk!  For your FREE software, visit:
http://dl.www.juno.com/get/tagj.