

| Subject: | Re: Fwd: speedo cluster for sale |
| From: | 1980 VW Westfalia \"Pokey\" |
| Date: | Tue, 29 Aug 2000 09:26:29 -0400 |
Check the archives: Don Oldenburg ELEVENHALF@aol.com posted a great walk through on August 20, 2000 12:50 PM. Or check out: http://www.pelicanparts.com/techarticles/Mult_gauge_repair/mult_gauge_repair .htm Thanks, Chris Gronski Toronto, Ontario, '80 Westy "Pokey" '87 Chevrolet Sprint 5-Door '91 Pontiac Firefly Convertible ----- Original Message ----- From: "Tom Smith" <TSmith5041@aol.com> To: <vanagon@GERRY.VANAGON.COM> Sent: Monday, August 28, 2000 6:15 PM Subject: Fwd: speedo cluster for sale > > In a message dated 8/27/00 2:32:47 PM, TSmith5041 writes: > > <<<<Tom, > > How did you\"fix" your odometer? What parts did you need ? Where did you > find > the parts? > > My odometer was reset by a used while the Westy was in motion, DOA for the > odometer. > > Regards, and thanks, > > Tom Hanon > Palm Springs, CA > 84 Westfaila > > > Tom Smith wrote: > > > I believe the 80 speedo cable has a different coupler for the speedometer > > than the > > 83/84. I got a used one out of an 80 to put in my 83 and cable wouldn't fit > > it. Fortunately I've fixed my old odometer and it works fine now. > > > > Tom Smith > > 83.5 Westie > > >> > Tom > Refer to the list of Aug 20,2000@12:51:52 Subj: Odometer doesn't work; > speedometer does? > > I used Don's suggested fix with one variation. Instead of putting super glue > in the hole in the gear, I put the gear down on the anvil of my vise; using a > hammer and punch with a 1/4" flat end put the punch on the raised hub area > that the shaft goes thru and hit the punch a couple of mild blows. Turn the > gear over and do the same thing again. It's gonna fit real tight on the shaft > now so you need to push the shaft thru the gear a couple of times to loosen > it up. Use a small deep socket as a tool to drive the gear on and off. > Reassembly is tough with the tight fit but I think the fix is permanent. > One other thing, when you take the pointer off, please be careful. It's on > the shaft tight and it will break. I had a junker to practice on and broke > the first pointer. I never did find a sure method to get if off. > Good luck! > > Tom Smith > 83.5 Westie > Charlotte, NC > ----------------- > Forwarded Message: > > Subj: Re: speedo cluster for sale > Date: Sunday, August 27, 2000 1:25:56 PM > From: hanran@earthlink.net > To: TSmith5041@aol.com > > From: hanran@earthlink.net (Thomas D. Hanlon) > To: TSmith5041@aol.com > > YTom, > > How did you\"fix" your odometer? What parts did you need ? Where did you > find > the parts? > > My odometer was reset by a used while the Westy was in motion, DOA for the > odometer. > > Regards, and thanks, > > Tom Hanon > Palm Springs, CA > 84 Westfaila > > > Tom Smith wrote: > > > I believe the 80 speedo cable has a different coupler for the speedometer > > than the > > 83/84. I got a used one out of an 80 to put in my 83 and cable wouldn't fit > > it. Fortunately I've fixed my old odometer and it works fine now. > > > > Tom Smith > > 83.5 Westie > > > >> > >
Have something to add on this topic today? Revive this thread in the forum »