Skip to main content
Gerry | Vanagon
Checking account...
← vanagon.com home · Continue the discussion in the forum
VanagonEuroVan
Subject:Re: start/stall problems
From:George Wietor
Date:Sun, 10 Sep 2000 19:53:05 -0700

I'm no expert, but I think my  '87 has a sensor on the
power steering pump to prevent stalling at low revs
when turning the steering wheel. Might be able to
check this out. Don't overlook the throttle switch
either.
Point of etiquete: Serious Volvo fans try to avoid
turning the steering wheel when the tires aren't
rolling. Supplosed to save wear on the rack and pump
and such. What does the List say? BOL, George---
CHRISTOPHER FRYER <alienj@USA.NET> wrote:
> hello list,
> i have had so many things going wrong so far,
> figgured id ask before and
> getting charged for the same advice so here i go
> when i first start runs fine except if i turn the
> wheel before i give it gas
> (otherwise it stalls) then once im going, every once
> in a while when i go to
> drive away it stalls, and takes many many tries to
> finally start again, so not
> only is it annoying to me, but just about everyone
> in my little town now hates
> me and my beloved syncro, the last time it stalled
> it was right after filling
> up on gas and using injector cleaner thinking maybe
> the gas gague sensor was
> wrong and 1/4 was really 0/0 or maybe injectors are
> clogged. it doesnt seem to
> be a cold start or warm start problem, just random,
> and i dont really feel
> like getting stranded or rear ended, im thinking
> fuel starvation, but if
> anyone has had problems like this or can think of
> anything else to try please
> respond.
> thank you all in advance
> christopher fryer
> 1987 vanagon syncro
>
>
____________________________________________________________________
> Get free email and a permanent address at
http://www.netaddress.com/?N=1

__________________________________________________
Do You Yahoo!?
Yahoo! Mail - Free email you can access from anywhere!
http://mail.yahoo.com/

Have something to add on this topic today? Revive this thread in the forum »