I'm sure glad I'm a member of these lists.  A couple of thousand brains are
sure better than my aging gray matter.  If this had been on one of my Fords
I would have bothered to question whether it was sae or metric, but on a VW
I've never come across a sae threaded bolt.  Go Figure.  I took this bolt
into two nut & bolt specialty shops and they both told me they didn't carry
11mm and didn't even question whether it was 7/16".

Thanks again to all

Steve

"Karl" <aufever@prodigy.net>wrote:
>Are you sure they are 11mm??
>I know seat belt bolts are 7/16" fine thread on all cars. Perhaps this size
>would work?
>

>> This is my problem.  The original 11mm x 35 mm bolts that fasten the seat
>> to the frame are now to short.  Evidently, the new body tool worked a
>> little too well and I'm now 20mm wider.  No problem, just order a bolt
>11mm
>> x 55 mm, right.  That's the problem.  No place I can find carries 11 mm
>> bolts with fine threads.  Why does VW use bolts with a bastard dimension?
>> Anyone have any suggestions?

>>
>> "Is Density a four letter word?"
><www.ourcenterville.org/blackham/page1.htm>