I have both types of bell housing and the operating lever is exactly the
same length on both.

Mark

Dave Bayer wrote:
>
> Hi-
>         Can anyone with a diesel tranny do me a favor and measure the
> length of the clutch operating lever (the little arm the the slave
> cylinder moves)? I am wondering if it is longer than the boxer operating
> arms (all boxers use the same clutch operating arm). The operating shafts
> are the same between the diesel and the boxer so I am wondering what the
> difference might be. The boxer lever appears to be 68mm from the
> edge of the hole to the tip with the ball riser sitting 6mm from the tip.
> TIA
>
> dave