In a message dated 9/19/00 7:45:39 AM, rbias@HOTMAIL.COM writes:

<< I seem to be having some trouble locating the correct tool to remove my
Tranny plugs (17mm Allen wrench) >>

Rich and Annemarie,

A decent industrial supply house should have a 17 mm Allen for a few dollars.
 I found that a good tool for this purpose can be made by cutting off about
an inch-worth from the long arm of the Allen and silver soldering it into the
box end of an old combination wrench.  If you do not want to do that, you can
also use the cutoff piece in a 17 mm socket.  What remains of the Allen
wrench is still a usable tool.

Rich