| Subject: | Euro-Drive: UPDATE 87 Volkswagen Vanagon, No-start |
| From: | "Randy Chevrier (by way of Derek Drew )" |
| Date: | Wed, 20 Sep 2000 02:15:43 -0400 |
iATN Help: send blank email to: help@i-atn.com Upgrade: http://members.iatn.net/enhanced.html Archives: http://members.iatn.net/sponsorsindex.html Post Message: http://members.iatn.net/email/ _______________________________________________________ 1987 Volkswagen Vanagon 2.1 L Trans: Standard Mileage: 175,000 km VIN: WV2ZB0251HH069532 Fuel: EFI Ignition: Eletronic with hall effect dev Emissions: liquid cooled federal emission Symptoms: No Start _________________________ UPDATE: __________________________ To all you guys that responded to my post(and there was a lot)THANKS! It's still not fixed.Got a call from the place I sent the ECU to and they said everything is fine.They are sending it back and I quess it's back to square one.Will keep you all posted. Again thanks for all the information. ____________________ ORIGINAL MESSAGE: _____________________ Towed this vehicle to my shop with no start,quit on the road. Check for spark--no spark--no fuel pump operation--no injector pulse. Following manual--checked for power at hall effect device on blk/red wire--no power,according to my manual the hall effect gets it's power directly from ecu.Checked for 5 volt reference at tps and cts--no reference. I have very limited experience on V.W.'s as there are not very many of them in my area,so, I also have limited information. Any ideas would be appreciated. Thanks in advance!!!!!!! Randy Chevrier rchevrier@dryden.net Owner/Technician Randy's Hi-Tech Autmotive Vermilion Bay, Ontario, Canada ___________________ TEST AND REPAIR DATA ___________________ Checked for codes and none were found. TESTING AND RESULTS Hall effect voltage - No voltage to hall effect from ecu Power feed to ecu - Normal-battery voltage Grounds - Ground to ecu--good _______________________________________________________ iATN Industry Sponsors: http://www.iatn.net/atn/ iATN WebSite: http://members.iatn.net/index.asp Guidelines: http://www.iatn.net/guide.html To configure or cancel your iATN account see: http://members.iatn.net/config/index.asp
Have something to add on this topic today? Revive this thread in the forum »