

| Subject: | Re: [vanagon] Re: manual transmission plug |
| From: | Donald Baxter |
| Date: | Sat, 7 Oct 2000 02:54:19 -0400 |
Two 17mm nuts screwed onto a bolt work pretty well for this too--slip the box end 17mm wrench over them to turn the allen bolt in the tranny. No skinned knuckles here. ----- Original Message ----- From: "Jere Hawn" <jbrschawn@EARTHLINK.NET> To: <vanagon@GERRY.VANAGON.COM> Sent: Saturday, October 07, 2000 2:10 AM Subject: Re: [vanagon] Re: manual transmission plug > Hi, > > I just took out my tranny plug last week. I used the 17mm craftsman L > shaped wrench and a 17mm closed end wrench. the closed end wrench was used > to turn the allen wrench because of the space considerations. One hand > pushes the allen wrench in the other turns the closed end wrench. P.S. > have clean paper towel with you because when the plug does break loose you > will want something for the blood coming from the knuckle you just jammed > into the linkage and water pipe brackets > > Jere > ============== > On Thu, 28 Sep 2000 11:28:53 -0700, Dave Nadeau <dave.nadeau@HOME.COM> > wrote: > > >Gary, > > > >Checker Auto Parts carries the socket wrench type 17mm tool for $3.49. If > you don't have a Checker nearby, you can get one from www.partsamerica.com > It is part number 648438. > > > >Dave Nadeau > > > >wb6otg wrote: > > > >> >Subject: manual transmission plug > >> > > >> >Getting hold of the 17mm hex to remove the transmission plug is > >> >getting more difficult. KD tools has a large allen wrench that > >> >sells for 7 dollars. Requires cutting to fit in the vanagon. > >> >If your plug is not on too tight a 17mm bolt that is double nutted > >> >is a poor man's replacement. Did not appreciate the earlier remarks > >> >by the group until I needed to check the tranny oil. > >> > regard gary > >> > > >> Does bug pak still sell one? (you know, the guys that sold a shrink > wrapped rubber band labeled VW engine rebuild kit) > >> > >> The double nut trick works very well if you touch an arc welder to it in > the right place. I made a tool this way (13mm allen) to remove a fuel > injector seat on a Jetta. Loctite might work well too. > >> > >> Bill > >> > >> -------------------------- eGroups Sponsor -------------------------~-~> > >> Free @Backup service! Click here for your free trial of @Backup. > >> @Backup is the most convenient way to securely protect and access > >> your files online. Try it now and receive 300 MyPoints. > >> http://click.egroups.com/1/6348/13/_/156147/_/970152089/ > >> ---------------------------------------------------------------------_-> > >> > >> To leave this list send an 'empty' message to <mailto:vanagon- > unsubscribe@egroups.com>
Have something to add on this topic today? Revive this thread in the forum »