> I just did the first oil change (with filter) on my new 85 1.9L.  The
specs
> call for 4.8 qts. of oil.  I put in 4.5 qts but the dipstick shows the oil
> level at least an inch above the top "full" notch.  Could this be simply
> because, since I haven't yet started the motor, the filter has not yet
been
> filled?  I don't want to start the motor if there's too much oil in there.
> Is this "looks like too much oil" thing normal?

Check the oil again first thing in the morning to get your best reading....
The level should come down some as the filter fills up with oil... but it is
likely overfilled. I think mine takes about 4 quarts... I think 4.5 may be
overfilled.
Anyway, it's easy enought to drain a half quart.
I always put in 4 quarts, start the engine, let it sit overnight to get a
'true reading'... and then adjust if necessary.

Bill

>
> Gregory W. Baskin
> Writer & Graphic Designer
> 1891 High St., Apt. 7
> Eugene, OR  97401
> (541) 341-1781
> (509) 271-1147 (fax)
> gregbaskin@biz-direct.net
>