I use my flex breaker bar(1/2" drive) from Craftsman/Sears and a 6 point
19mm socket.  It's long enough to stand on and bounce if the nuts are
particularly testy about coming off.  And of course, a cheater pipe slides
over it right nicely if that doesn't work.  Lifetime guarantee but you'll
pay for it.

Dimwitted Moose and Flying Squirrel
-----Original Message-----
From: Bill Davidson <wdavidson@THEGRID.NET>
To: vanagon@GERRY.VANAGON.COM <vanagon@GERRY.VANAGON.COM>
Date: Thursday, November 02, 2000 10:36 AM
Subject: Re: speaking of flat tires. . .

>> However, when trying to change the wheels myself, the lug nuts
>> were simply immovable.  I can imagine getting stuck in the
>> middle of winter when it's -30 and not being able to get those
>> suckers off, and meeting a nasty fate.  Has anybody found a
>> wrench with a little more leverage to it?
>
>use an 18" or 24" piece of pipe that will fit over the end of your wrench
or
>better a breaker bar to give you more leverage....
>
>Or should I instruct
>> the guys at the tire shop to tighten the lugs to a specific
>> torque?
>
>The problem may be electrolisis between the nuts and the wheel... some have
>used anit-seize compound... some say this doen't work for long... some say
>to just back off the nuts and then tighten again periodically to prevent
>seizing.
>
>Bill
>
>>
>> I'm a big 29 year old dude and can't imagine how some smaller
>> folks would handle it.  I've changed tires on the van in the
>> past, but this time they're particularly stuck.
>>
>> Jeff
>> 85 Westy
>> Winnipeg
>>