Skip to main content
Gerry | Vanagon
Checking account...
← vanagon.com home · Continue the discussion in the forum
Subject:Re: WRONG INFO - O2 Sensor, Bucking, etc.
From:Rico Sapolich
Date:Wed, 1 Nov 2000 09:50:22 EST
In a message dated 11/1/00 8:56:51 AM, midwesty@midwest.net writes:

<< The minus signal must travel from the sensor

device assembly,  to the o2 case,  to the exhaust system,  to the engine,

and then to pin 19 of the ecu wiring harness.   This is why the grounds are

so critical on our vans. >>

Darrell,

So, it would be beneficial to clamp a terminal on the body of the OXS and
bond it to the reference ground.

Rich