

| Subject: | Re: Bumper/Foglights... |
| From: | Anthony L. Mourkas |
| Date: | Sun, 5 Nov 2000 10:50:41 -0500 |
>I bought a set of foglight/driving lights for my 84 vanagon... >problem is access to bottom of bumper is limited, and top isn't much >better. I see two bolts, one on each end of the bumper... Is this the only >thing holding the bumper on? Yes. I am assuming that you have already removed the rubber bump strips from the bumper and discovered the two bolts, one under each bump strip. Of course, you must remove the plastic bumper endcaps before unbolting the bumper. BTW, once you get the bumper off you will see four sets of three holes in the sheetmetal under the bumper. These holes come predrilled from the factory to accept VW factory auxilliary light mounting brackets, part # 251 951 185. I installed a set of these on my 84 Westy when I mounted a set of Hella 500 fogs. Very robust and clean installation, no drilling into the bumper. Good luck with your install. Best wishes, Tony Anthony L. Mourkas Hampden, Maine, USA 1984 Vanagon Westfalia 1991 Jetta Eco Diesel 1991 Volvo 240 sedan
Have something to add on this topic today? Revive this thread in the forum »