There should be a wire "bale" type clip that swings up and clips this
plug in place.  Yours may have been lost, it should be on the
distributor socket.

David Marshall wrote:
>
> I have just used some epoxy to hold broken connectors one.
>
> -- David Marshall - Volkswagen Enthusiast - Quesnel, BC, Canada   --
> -- 78 VW Rabbit, 79 VW Iltis, 80 VW Caddy, 84 VW Westfalia        --
> -- 85 VW Cabriolet, 87 Audi 5000 Quattro, 88 VW Syncro Double Cab --
> -- David's Volkswagen Home Page        http://www.volkswagen.org  --
> -- Fast Forward Autobahn Sport Tuning  http://www.fastforward.ca  --
> -- david@volkswagen.org (pmail) or vanagon@volkswagen.org (list)  --
>
> -----Original Message-----
> From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com]On Behalf
> Of Alan S Gondry
> Sent: November 6, 2000 12:08 AM
> To: vanagon@GERRY.VANAGON.COM
> Subject: Sealing distributor
>
> Does anyone have any good ideas on attaching and sealing the hall sensor
> plug attached to the distributor?
>  Mine has become unlatchable to the distributor.  If this is not the
> correct name then bare with me.  It is the electrrical connection on the
> distributor for a 1983 h2o.
>
> Alan Gondry
> '83 h2o vanagon
> Vancouver, WA
>
> ________________________________________________________________
> YOU'RE PAYING TOO MUCH FOR THE INTERNET!
> Juno now offers FREE Internet Access!
> Try it today - there's no risk!  For your FREE software, visit:
> http://dl.www.juno.com/get/tagj.

--
Stuart MacMillan
Seattle

'84 Vanagon Westfalia w/2.1
'65 MGB (Driven since 1969)
'74 MGB GT (Restoring)

Assisting on Restoration:
'72 MGB GT (Daughter's)
'64 MGB (Son's)

Parts cars:
'68 & '73 MGB, '67 MGB GT