This sounds interesting!. However....

their web site says it is used for toe alignment. No mention of anything
else being measured.

Looking at the Bently, on page 44.2 - it provides specs for camber and
caster, as well as toe..

Are these routinely adjusted during an alignment?

Marshall Ruskin
84 Westy

>You can align your own Van for $65. and have the tool forever
>It's called "The Aligner" by Wishbone Racing Of Canada
>http://home.istar.ca/~wish/aligner.html
>or e mail  wish@istar.ca
>Dan
>
>-----Original Message-----
>From: Vanagon Mailing List [mailto:vanagon@GERRY.VANAGON.COM]On Behalf
>Of PSavage
>Sent: Thursday, November 16, 2000 4:09 PM
>To: vanagon@GERRY.VANAGON.COM
>Subject: Front End Alignment Needed?
>
>
>Good evening Listees,
>As my departure for points south draws near
>I find I have many questions/loose ends...
>Here's one:
>I recently had new ball joints installed as part of a
>lot of other preventative maintenance.  The mechanic
>told me that as a result I absolutely needed to have
>the front end realigned.
>But--I just had the front end realigned about 5K
>miles ago, before the work was done.
>I would appreciate the opinions of the list.
>Thanks,
>Phaedra
>