Question about this...

When we sold my wife's Civic, I pulled off most of the performance stuff.
One of the things she had installed is an MSD 6A ignition. I played with the
idea of installing this in the bus, but became pretty leary pretty
quick.......

I remember that this ignition helped her car run MUCH better. Nice and
smooth. Is it feasible to install this in the van? Anyone with some
experience on this?

Thanks,

Don Preston
'87 Wolfy GL
~Betsy the Mp3 Bus~
----- Original Message -----
From: "Craig Spaeth" <spaeth@GORGE.NET>
To: <vanagon@GERRY.VANAGON.COM>
Sent: Friday, November 24, 2000 9:06 AM
Subject: Re: Rev Limiter

> If you really want a Rev limiter you can install an MSD ignition. They
have chips
> so you can vary the rev limit. It will cost you somewhere around $250 or
maybe more
> for the ones that let you set the rev limit. You should check carefully to
make
> sure they have a chip with a low enough limit as these are mainly designed
for
> racing applications so the limits may be higher. I have never run one, I
have just
> done some research on them, so I have no first hand experience.
> Someone mentioned that it would be an "engineering feat" for a rev
limiting rotor
> under $10. If I remember right I thought the rev limiting rotors were
about
> $25-$30.
> hope this helps,
> Craig
> the Gorge VW club
>