Mark,

I had this very same problem.  It really caused my FI system some grief since I couldn't
get the throttle switch to adjust properly.  The adjustment for the idle position is very
particular on the Digifant and with the TBody bushings being sloppy I couldn't get the
idle setup right.  As a result the van would stall a lot when stopping at a light when
cold.

The solution:  Rebuild the TBody yourself!  I did it.  Just disassemble it carefully and
use teflon tape to 'build up' the bushings.  Works great - costs nothing.  Mine has been
working for well over a year now.

Damian

> Date:    Wed, 29 Nov 2000 14:24:20 -0500
> From:    Mark McCulley <transporter99@HOTMAIL.COM>
> Subject: rebuilding throttle body
>
> Anyone had any luck rebuilding a worn out (bushings) throttle body? What
> kind of shop would do this type of work?
>
> Mark McCulley
> Seattle WA