Paul;
I always use allmetal it is a metal base bondo which does not absorb
moisture like regular
Bondo.
I did this to my 83 westy with no rust in 7 years now.
Hans

-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com]On Behalf Of
Paul M. Hillbish
Sent: Saturday, December 09, 2000 9:45 PM
To: vanagon@GERRY.VANAGON.COM
Subject: Re: 83 body work saga goes on

In a message dated 12/9/00 9:06:10 PM Eastern Standard Time,
jromas@columbus.rr.com writes:

<< Get a heat lamp to cure the Bondo and put more hardner in it.
  >>

Should the Bondo be warm to start with? Or should I heat the area that I'm
working on to allow it to dry. Another question, is there a ratio or a
different way to give the Bondo the consistency of clay? I need to fill a
large area, and be able to shape it. My previous attempts at this proved
unsuccessful. The mixture was too runny to mold easily, and I spent a half
hour shaping the liquid until it began to set. Thank you for the input.

--Paul--

_______________________________________________
Why pay for something you could get for free?
NetZero provides FREE Internet Access and Email
http://www.netzero.net/download/index.html