Three screws; two of them (maybe all three) are Loc-tited in.  You probably
have to relieve the holes in the plate a little to get some sliding
room.  I suggest to take care to slide only toward or away, not sideways.

david

At 03:26 PM 12/29/2000, Schmidt wrote:
>Opening and cleaning the AFM didn't help my intermit loss of speed,
>mileage, rough idle problem. I did it as per archives.  Some people
>mention moving the "track" the lever follows.  To accomplish his, does one
>move the baseplate or the arm itself.  It seems there are 3 screws holding
>that base plate on.  I assume I am to loosen these and push the plate
>barely closer to the arm.  Is this correct?
>Thanks for a simple yes or clarification if you have done this.
>Jay

David Beierl - Providence, RI
  http://pws.prserv.net/synergy/Vanagon/
'84 Westy "Dutiful Passage"
'85 GL "Poor Relation"